Hemi Swap 1yr Plan
#151
Join Date: Jan 2011
Location: Sandy, UT. (SLC Suburbs)
Posts: 2,063
Likes: 0
Received 5 Likes
on
5 Posts
It would have been as simple as motor mounts and a program, and/or vehicle specific ECU.
I actually think my passesnger side motor mount will bolt up with 3 of the 4 bolts already on the 4.7 bracket lol. What's one bolt? Nothing! Drivers side will need modding, but I can't see it being too bad but I won't know until later when I get some very precise measurements with the brackets in hand.
I actually think my passesnger side motor mount will bolt up with 3 of the 4 bolts already on the 4.7 bracket lol. What's one bolt? Nothing! Drivers side will need modding, but I can't see it being too bad but I won't know until later when I get some very precise measurements with the brackets in hand.
#152
#154
Join Date: Jan 2011
Location: Sandy, UT. (SLC Suburbs)
Posts: 2,063
Likes: 0
Received 5 Likes
on
5 Posts
After its on, I'm going to order more and reproduce like 4 sets. Wish I could take care of the oil pan too, for 4wd guys, but I'm not even gonna touch it since I don't have to.
DontShoot on Dak-Dur made his brackets and sold quite a few, but there are a lot more 2nd gens out there so I don't know how many I would sell.
DontShoot on Dak-Dur made his brackets and sold quite a few, but there are a lot more 2nd gens out there so I don't know how many I would sell.
#155
G2 and G3 Dakota mounts are not interchangeable. The frame mounting points are different. I had a set custom made and mailed to me. After they arrived DJwolf37 and I tried to install them. I had to seel them as they wouldn't line up. like they do on the G2s. Even a machine shop couldn't make them work.
http://www.dakota-durango.com/forum/...ghlight=mounts
http://www.dakota-durango.com/forum/...ghlight=mounts
#157
The first set were made my a dak-dur fab master (truebluert) but they didn't fit and he couldn't make a set for the G3. I had to sell them.
The set that is still on the truck was fabricated my Morris Racing in Omaha, NE. I got a new set of mounts, they burned away the vulcanized rubber and welded solid metal in it's place. I loved those mounts.
http://www.facebook.com/#!/profile.p...00000943413138
The set that is still on the truck was fabricated my Morris Racing in Omaha, NE. I got a new set of mounts, they burned away the vulcanized rubber and welded solid metal in it's place. I loved those mounts.
http://www.facebook.com/#!/profile.p...00000943413138
#160