stolked !!! 03 ram 2500 hd just ordered up some rough country 2' lift coils and brand new 35/12.5/17 mountung them on eagle 17' rims with a zero offset .... anyone run these coils before >? true 2' lift ? and will they settle to like 1.5 ? do I have to replace shocks or sway bar ends or just stuff em in and do some trimming ..? any one run them with 35' tires actual diameter is like 34.6... thanks for any replies

 

looking at it with true 33' tires on right now theres tons of room just in full crank looks like wheel tubs on cab side are gona grind ... and in the front just going to take the chin spoiler right off... did it on my 02 1500 looked great ... looked a little higher and better clearance for heavy angle hils

 

I had 20s and 35s with a level and had no problems

 

Do you have any pics of that?

 

The tires are Bald but i paid 20 bucks for all four.

 

Hi guys, so I am new my truck just got a 03 2500 4X4 from a 01 1500 2wd. When I got the truck it has 305/65r17 on it, looks good but would like to maybe go bigger. Can i do something like a 35/11.5 17? I have been though almost every post but dont think I saw this question. A simple yes or no is all i need but any advise would be great. Thanks guys

 

It would be really close fit

 

so with the tire size and back spacing on these rims will this work on my 2003 1500 with the torsions cranked to sit level
http://www.ebay.com/itm/20-BALLISTIC...e16176&vxp=mtr

 

for anyone whos looking at doin a lil lift on there 3rd gen 2500 hemi
I put in the rough country 2' lift coils and clear true 35x12.5x17 nitto trail graps with no rubbing and no trimming , I am runnning 0mm aftermarket wheels and now need to do 3' rear blocks cuz the front gained easy 2.5- 3 ' and it is nose high will be adding pics to my garage soon ... so impressed didnt think the lift coils were going to make it look so boss happy camper ... and recomend the rough ****ry coils for sure

 

You could have fit them with out the luft