When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
so i saw on oklahemi's write up he used 4.7k-Ohm resistors. 1/4 watt, 5% tolerance. i just ran out to radio shack and got some resistors, but they ar 47k-Ohm. 1/2 watt, 5% tolerance. will they work or should i get something different?
1/2 watts wont make a difference. 4.7k's trick the PCM into thinking the incoming air is 22* cooler. But it will only go so low before the PCM takes over and corrects itself. So if its 50* outside, dont think the PCM will let it think it is 50*-22*
This is a pic of mine I did some time back. Tuned has it right on why you should bend the resistor wires in half.