Oil pressure

Subscribe
Mar 29, 2009 | 03:10 AM
  #1  
I started my truck today (2006 Ram QC Sport Hemi) to go to work. The check gagues light came on and i noticed the oil pressure dropped to nothing, i shut the truck off and waited a few minutes and started it back up and everything was fine, drove it to work with no problems.
What would cause this? (could it be a bad sending unit?)
I changed the oil about two weeks ago and levels are fine, i cannot find any leakes or anything.
Reply 0
Mar 29, 2009 | 05:19 AM
  #2  
Probably the sending unit.
Reply 0
Mar 29, 2009 | 10:14 AM
  #3  
did it throw a code?
Reply 0
Mar 29, 2009 | 10:45 AM
  #4  
codes?? prolly sending unit
Reply 0
Mar 29, 2009 | 10:52 AM
  #5  
mines does the same.....only when its really cold outside though
Reply 0
Mar 30, 2009 | 02:09 AM
  #6  
It did not throw any codes, i guess i will cross my fingers and hope it dont happen again
Reply 0
Mar 30, 2009 | 09:58 PM
  #7  
Oil pressure sending unit. Been there, done that. Replace it.......
Reply 0
Mar 30, 2009 | 10:11 PM
  #8  
Agreed sending unit, seem to be culprit quite often.
Reply 0
Mar 30, 2009 | 10:30 PM
  #9  
Did this on my 03. I replaced the oil pressure sensor. Fixed the problem, u can try that, the part was cheap enough...
Reply 0
Subscribe