When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Hey folks,
Just bought a new 2005 Ram 1500 QC 4wd Hemi SLT w/ 12K miles, Dealership was giving a deal I just couldn't refuse. Anyways, What mods would be required to make this thing be capable of doing a burnout? It seems it just doesn't want to break loose, And thats with an empty bed and on a smooth surface.
Don't get me wrong, I don't burnout often at all. It just seems dissapointing I can't even break the wheels loose.
shoulda got the 5.9 jk , i have a superchips and set it on 91 performance and use reg gas, no problems or ping or anything like that
With the CAI, Electric fan and DSP, And on top of learning little better about the E throttle control, I can start and sustain a good burnout for a bit of a distance.
With the CAI, Electric fan and DSP, And on top of learning little better about the E throttle control, I can start and sustain a good burnout for a bit of a distance.
All I have is a intake and exhaust and if I drop it down to 2nd at around 20-25 mph and punch it I start to do a 1 wheel peel. Pretty sure these trucks stock can do a burn out