When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I put the leveling kit (2") on mine and i am having the same problem the top control arm is to wide i think and only gives me a 1/4 inch between the control arm and spring bucket. I spent 6 bucks at auto zone and bought shock 2 inch extenders and i still have the problem with hitting. called daystar and he said have the truck aligned and i did only to leave with the thing still hitting? wonder if the top control arm can be moved out. thinking about using my grinder and shaving a bit off were the control arm is hitting? PLEASE HELP
yea mine is too...i already tried to get a grinder to it but you cant get to it without taking the UCA off...like i said, i have rubber belt wrapped where it hits but it still jarrs, just not as bad (probably 25% less)