3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Check Gauges Light

Thread Tools
 
Search this Thread
 
  #1  
Old 01-04-2010 | 10:16 PM
Shiloh 24's Avatar
Shiloh 24
Thread Starter
|
Record Breaker
Joined: Aug 2009
Posts: 1,956
Likes: 0
From: El Dorado, Kansas
Default Check Gauges Light

I have never heard of this happening before but here lately, just at random points the Check Gauges light flashes on and makes a ding for about a second or two and then flashes off. Then maybe 20 minutes later it will do it again. Any ideas?
 
  #2  
Old 01-04-2010 | 11:25 PM
ram man17's Avatar
ram man17
Captain
Joined: May 2009
Posts: 553
Likes: 0
From: Tallahassee, Florida
Default

Mine comes on when I start up my truck sometimes...but the oil pressure gauge reads 0 so I turn the truck off and on and it goes back to normal. Kinda strange
 
  #3  
Old 01-05-2010 | 12:56 AM
Jammen86er's Avatar
Jammen86er
Registered User
Joined: Sep 2009
Posts: 21
Likes: 0
From: Southeastern WI
Default

Originally Posted by ram man17
Mine comes on when I start up my truck sometimes...but the oil pressure gauge reads 0 so I turn the truck off and on and it goes back to normal. Kinda strange
I just started getting this same issue... twice so far, figured it was due to cold weather?
 
  #4  
Old 01-05-2010 | 02:31 AM
DodgeThunder's Avatar
DodgeThunder
Veteran
Joined: Aug 2008
Posts: 498
Likes: 1
From: Langley, B.C. Canada
Default

any gauges reading screwed up enough to set off the light? This is why you buy aftermarket gauges.. I dont trust all that electric computer crap..
 
  #5  
Old 01-05-2010 | 02:56 AM
jeepfourfun's Avatar
jeepfourfun
Registered User
Joined: Jul 2008
Posts: 5
Likes: 0
Default

Not to **** on anyone's parade, but my truck did the exact same thing and I thought just like you guys, especially since I've had electric issues in my dash in the past....and lo and behold the gauge and warning light were right and now I've got a bad bushing and blown rod. CHECK YOUR SH*T. DON'T ASSUME IT'S A MALFUNCTION LIKE I DID.
 
  #6  
Old 01-05-2010 | 06:23 AM
xfeejayx's Avatar
xfeejayx
3rd gen Ram, Newbies
Joined: May 2008
Posts: 3,816
Likes: 0
From: Chicago
Default

mine did it last week. truck was running too hot, low on coolant. luckily i was on the highway so I just floored it and the temp came back down. take a quick look at all your gages when that light turns on.
 
  #7  
Old 01-05-2010 | 08:01 AM
SMKNRAM's Avatar
SMKNRAM
Champion
Joined: May 2009
Posts: 3,186
Likes: 2
From: Sylva, NC
Default

Only time mine ever did it, it was the oil pressure gauge. Sure enough I was almost a quart low! So I agree go check your sh*t! Don't ignore it!
 
  #8  
Old 01-06-2010 | 01:04 PM
Shiloh 24's Avatar
Shiloh 24
Thread Starter
|
Record Breaker
Joined: Aug 2009
Posts: 1,956
Likes: 0
From: El Dorado, Kansas
Default

Well I think I found the problem. I looked at the gauges real quick when the light came on and my oil pressure was in the red and then it went back up to normal. I got out and checked my oil and it was barely on the dipstick. She took two quarts and is still a bit low! I don't get it, I haven't had any puddles are noticeable leaks. Surely it wouldn't burn two freakin quarts! I about **** a freakin brick, but then again there are some "gangsta's" in town that hate me and I wouldn't put it past em to drain my oilpan overnight.
 

Last edited by Shiloh 24; 01-06-2010 at 01:13 PM.
  #9  
Old 01-06-2010 | 01:16 PM
SMKNRAM's Avatar
SMKNRAM
Champion
Joined: May 2009
Posts: 3,186
Likes: 2
From: Sylva, NC
Default

may not have been full on the last oil change
 
  #10  
Old 01-06-2010 | 01:19 PM
Shiloh 24's Avatar
Shiloh 24
Thread Starter
|
Record Breaker
Joined: Aug 2009
Posts: 1,956
Likes: 0
From: El Dorado, Kansas
Default

Originally Posted by SMKNRAM
may not have been full on the last oil change
That very well could be the stealership did it so ya never know I guess. I need to start payin more attention to my baby before I eff something up.
 


Quick Reply: Check Gauges Light



All times are GMT -4. The time now is 04:56 AM.