When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
hey guys have located a regular cab srt rear end want to put it in my 03 quad cab 4x4 whats it take can i use the srt brakes i have 17" wheels i shure i have to flip the pads what about the speed sensor drive line alll help would be great
PLEASE use punctuation!! It make out deciphering of your post SO MUCH easier!
What gears do do you have now in the front diff and what gears are in the SRT rear diff because they BETTER match up or no 4wd for you. And being you are in WA, I am assuming you need your 4wd.
PLEASE use punctuation!! It make out deciphering of your post SO MUCH easier!
What gears do do you have now in the front diff and what gears are in the SRT rear diff because they BETTER match up or no 4wd for you. And being you are in WA, I am assuming you need your 4wd.
I agree with punctuation as well. But come on Weed, what's up with that sentence?? I'm just kiddin' ya bro. I know you meant it makes deciphering of your post so much easier.
Yes OP, like Weed said the gears have to match in the front and rear ends.
sorry guys...the srt has 456 and so does my truck. just wondering about the srt brakes with 17" wheels? As for the speed sensor does it just use the same plug?
The 9.25 has just being hell for problems..so i need as much help as possible
The plugs should be the same. The brake will make no difference. A lot of guys like the bigger brakes for more surface area to help stop better/faster. As long as your from diff has 456 you will be fine.
If you do it post up a lot of pics, I wanna see how it turns out. The rear SRT brakes are damn near the same as our regular front brakes, at least as far as rotor's and calipers go. The fronts you will need at least a 20" rim I believe if you plan on taking it that far.
Will standard Ram 1500 brakes bolt up to the SRT10? The eBay axle doesn't have brakes.
I think they might, but don't hold me to that as I don't have an SRT to be sure. I know I think it was Hemi Greg that posted up the fronts were similar to SRT rears so it's possible I guess. This link might have some info, it says that aftermarket brakes can be bolted up to it.