Cold Air Intake ?
#21
wtf is a took brush? Check out my garage I have a painted shltter pipe. looks and performs real well. i used engine paint btw. and a 45 and 90 degree elbows with a 1 foot section should put you near the right head lamp assembly where you get the best air. spectre filter and a breather filter for the oil drain tube.
#22
#23
#26
I am going to make anothere one this is to short i what it up by the headlight right more cold air but you guys never worrie about the pvc clue coming off on the in side and being suck down the intake?
#28
#29
Join Date: Jul 2007
Location: South Georgia/East Florida
Posts: 24,686
Likes: 0
Received 20 Likes
on
19 Posts
$70 MISTAKE!!! First of all, if you spent $70 you are shopping in the wrong place. Secondly, you obviously can re-use the boot and the filter, so you would be out about $9 in PVC and grommets by my estimation...
10' of schedule 40 PVC is a little under $8 here, I've made three of them out of a length before...
10' of schedule 40 PVC is a little under $8 here, I've made three of them out of a length before...
#30
Screw that...just don't glue till it's in and you are satisfied. Then make 2 and sell one to a friend.
you know the old "measure twice, cut once" well, "mock it twice and glue once".