I had them wired because I ordered capacitors and tried everything because nothing would work. Now I only have 1 high beam working too...

 

alright so my problem is i bought a hid kit and it came with the harness ( i will link below) and got some plug in cancellors and when i installed lights blinked every few seconds and a loud click as well as lamp out signal on my dash i have an 2002 ram 1500 5.9l and i did just buy those resistors from newark, are those going to fix my problems?

Hid Kit - http://www.ebay.com/itm/290425447857...84.m1423.l2649

Cancellors - http://www.ebay.com/itm/200675051474...84.m1497.l2649

 

I always like to use resistors on 02-05s and caps for 06+

 

so will the resistors solve the problem? also how are they wired can anyone give me a pic?

 

Ivr got pics of mine in the folders of my sig link or check the first or second page of the thread

 

on your second to last photo those blue plugs my harness that connect to the headlight power i only have one , do i need a different hid harness??

 

Pretty much all harness have one plug that connects to the drivers side. You need to go to ebay and buy a spare plug and build one like i did to go on the pass side to trick the truck into thinking there are bulbs there.

 

ok well ive done some skimming through the thread and other places but more problems keep popping up. got a bixenon HID kit from my gf (she got it off ebay) but its not a bad set, i dont think. i have an 08 diesel 2500 i hooked up head and fog light first one fog light didnt work now it does. second they flicker, i know now i need a capacitor. thirdly i wake up this morning and come to find out one head light was one and another one was off? i had to unplug the light to get it to turn off. what is going on here!!!??

 

Start with the basics. Wiggle some wires and check all connections.

So you have two kits right? One kit is connected to both headlights right? The other kit is connected to both fogs right?

No need for caps on the fogs but you do need them on the head lights.

If you dont have them yet, get them and go from there. Remember you should have a set of caps connected to the pass side also to mimic that side of head light

 

ya im not worried about the fog lights but ive been looking into the caps but also at the resistors.. im still doing some research on account of why one headlight randomly was on and wouldnt turn off