https://dodgeforum.com/forum/3rd-gen...gauge-diy.html


Is this all the same for my 08??? It should be. I found the pillar......not easy for an 08. I just wanted to check before i order addapters I don't need.

 

Parts list should be accurate as far the the two adapters. You can also use Auto Meter's temp sender manifold #2286 that goes into the tranny line which eliminates adapters and crawing under the truck for test port #3. That is what I am going to do. Easier on me cutting into the line near the cooler/radiator than crawling under the truck to get to TP3.



What gauge are you planning on using? Did you know Auto Meter offers a factory matched gauge for the Rams? They offer it in short sweep( #8549 )and full sweep ( #8557 )in the required 2 1/16" size. I decided to go with this gauge in the short sweep style.



Why did you have a problem finding the SRT-10 A-Pillar? Any Dodge dealer can order the SRT-10 pillar for 06-08( 09 HD's too )Rams. Standard OE part. I got mine from the dealer I use for $40. Took 2 days to get in. ( Mopar # ZL39BD1AA )

I haven't actually hooked everything up yet as the weather is too bad. Just have it all here( gauge hasn't arrived yet )waiting.

 

this is great info....what is the difference between short sweep and long sweep? does it really make a difference? Anyone find a good place to get a deal on the parts?

 

If you get the Diablo Trinity you would not need to add a gauge......LOL

 

Short sweep has less of a temperature range and fewer points of data. Full sweep as the name implies has a greater temperature range and more points of data.

Here are the Dodge OE match gauges in SS and FS so you see whhat I mean...

SHORT SWEEP:


FULL SWEEP:

 

my set up is for sale if you want it...

 

i am interested silver bullet I'll send you a pm. I've done business on here before and can give a reference.

 

I have the Phantom II...wish I would have known about the 8557..or is it new. Put mine in about a year and a half ago...the manifold works really well.

 

well went to install my stuff today as it's a BALMY 32'! I apparently do not have a test port 3.......I have the spots for them they are just not there. Looks like I'm on hold til I get my manifold kit.

 

Thanks for all the info I got a gauge from a friend and I still haven't open it yet just getting all the info together.I like plaining stuff like this out