3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Etc problems!

Thread Tools
 
Search this Thread
 
  #11  
Old 08-29-2012 | 03:55 PM
willdikem66's Avatar
willdikem66
Record Breaker
Joined: Jul 2012
Posts: 1,519
Likes: 0
Default

Sounds like an electrical issue.


As for the p300 have you changed your plugs. If so Did you keep the OEM champion coppers
 
  #12  
Old 08-30-2012 | 06:43 AM
Northern Goat's Avatar
Northern Goat
Rookie
Joined: Aug 2012
Posts: 66
Likes: 0
Default

Originally Posted by Dmac25

I'm think it's probably the MAF throwing at least 2 of these. Im not real sure though.
Hey Dmac hate to be a bummer, but there is no MAF sensor on a 2004 Hemi. Check ground straps as your getting a lot of different codes all at once that don't really have a lot to do with each other.
 
  #13  
Old 08-31-2012 | 07:08 PM
Dmac25's Avatar
Dmac25
Thread Starter
|
Registered User
Joined: Aug 2012
Posts: 7
Likes: 0
From: East Texas
Default

Yeah I did some research and saw that! No I havnt changed the plugs. I just recently purchased the truck. It had been sitting for a while and after I drove it for a while these codes popped up. I'm new to the hemi ram so bear with me lol I guess I need to change the plugs (which sucks considering there's 16..) I'll check them but are there any sensors that may possibly need cleaning/replacement?
 
  #14  
Old 08-31-2012 | 07:43 PM
Dead2Fall's Avatar
Dead2Fall
Captain
Joined: Mar 2012
Posts: 524
Likes: 0
From: New Jersey
Default

P0127 is intake air temp too high. That coupled with the barometer one means somethings wrong on the air intake side and probably sensor related. If it's sensing weird stuff with air intake and trying to compensate, I could see a possible random misfire.
 
  #15  
Old 08-31-2012 | 07:47 PM
Dead2Fall's Avatar
Dead2Fall
Captain
Joined: Mar 2012
Posts: 524
Likes: 0
From: New Jersey
Default

Since your getting a code from map sensor and iat sensor, goat is probably right with it being something electrical.
 
  #16  
Old 09-01-2012 | 10:09 AM
willdikem66's Avatar
willdikem66
Record Breaker
Joined: Jul 2012
Posts: 1,519
Likes: 0
Default

Map Sensors are cheap on Rock Auto if you just wanted to try one. 15 bucks.
 
  #17  
Old 09-01-2012 | 10:15 AM
Dead2Fall's Avatar
Dead2Fall
Captain
Joined: Mar 2012
Posts: 524
Likes: 0
From: New Jersey
Default

You could replace both for under $30
 
  #18  
Old 09-01-2012 | 10:29 AM
willdikem66's Avatar
willdikem66
Record Breaker
Joined: Jul 2012
Posts: 1,519
Likes: 0
Default

I never would have gone to rock auto if it wasnt for this forum, Im glad i did ive prolly saved more than ive spent!
 
  #19  
Old 09-01-2012 | 10:56 AM
Dead2Fall's Avatar
Dead2Fall
Captain
Joined: Mar 2012
Posts: 524
Likes: 0
From: New Jersey
Default

Sometimes they aren't the cheapest
 
  #20  
Old 09-01-2012 | 11:58 AM
willdikem66's Avatar
willdikem66
Record Breaker
Joined: Jul 2012
Posts: 1,519
Likes: 0
Default

Dang ive yet to find a part that i needed that they werent cheaper on, im sure there are some though
 


Quick Reply: Etc problems!



All times are GMT -4. The time now is 09:16 AM.