When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Well I replaced those sensors and cleaned the intake and the etc light went of and it ran great. Still have the CEL but not too worried about that. I appreciate all if yalls help and I'm sure I'll be back!
You can try re-calibrating the TPS
With the key on (engine not running) Slowly depress the pedal to the floor in an span of 30 secs, then release slowly over 30 secs... Its worth a shot anyways...
That is fo the diesel engine not the Hemi's. I have seen that at least 500 times and its not correct info. I checked with Dodge mechanic here and he confirmed it.
Hey guys, sorry to hi-jack but I have the same random misfire code. I just changed my plugs with the OEM Champion Coppers. Are all those sensors the next step? I am going to clean the Throttle Body next. I had the battery off during the whole plug change, so I don't think doing that step again will help but its easy so I might try it. Any other suggestions? When I start it sometimes, I will drive for about 1 minute and it starts to basically die. It runs super rough, then my light comes on flashing and I lose power, so I pull over and turn it off. Turn it back on, no light and it runs great. Any help would be great
Doesn't tell me a cylinder...just random misfire, that's the problem. It's just weird that it only happens sometimes, the night does not stay on, and it just loses power, then I turn it off and back on, and it's good to go. That's why I'm wondering if it is a sensor or computer or something electrical.