3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Please help!!!! Driving me nuts

Thread Tools
 
Search this Thread
 
Old Nov 26, 2012 | 08:59 PM
  #51  
Wilson01960196's Avatar
Wilson01960196
Thread Starter
|
Rookie
Joined: Oct 2012
Posts: 92
Likes: 0
Default

Originally Posted by Gone Fishin
So where is this at?????
What u mean?
 
Reply
Old Nov 26, 2012 | 09:01 PM
  #52  
Wilson01960196's Avatar
Wilson01960196
Thread Starter
|
Rookie
Joined: Oct 2012
Posts: 92
Likes: 0
Default

Originally Posted by GreenEH
Does your speedo only freeze at a certain speed? I had a problem with my tach where the needle would freeze/stick around 2k rpms only when the truck warmed up inside the cab. Tuned out the hub that attaches the needle to the cluster was rubbing on the instrument panel faceplate. All I had to do was pull the needle out slightly and the problem was solved. That wouldn't explain your blinker issues though, idk. My problem turned out to be mechanical but yours definitely sounds electrical
no it freezes at random speeds and when it freezes so does the blinker..vut when its cold it doesnt..im starting to think it has something to do with the ground that runs to the bottom of the engine but ive looked at it and see nothing wrong.
 
Reply
Old Nov 27, 2012 | 08:22 AM
  #53  
Izero's Avatar
Izero
Champion
Joined: Aug 2006
Posts: 4,489
Likes: 4
From: New Jersey
Default

Take off each ground, and use a piece of 40-60 grit sandpaper and just clean up each mounting point as well as the eye-loop connections and reconnect them... that will verify if it is a ground problem or not.
 
Reply
Old Nov 28, 2012 | 09:27 AM
  #54  
Wilson01960196's Avatar
Wilson01960196
Thread Starter
|
Rookie
Joined: Oct 2012
Posts: 92
Likes: 0
Default

Originally Posted by Izero
Take off each ground, and use a piece of 40-60 grit sandpaper and just clean up each mounting point as well as the eye-loop connections and reconnect them... that will verify if it is a ground problem or not.
i am replacing my passenger side hub friday..the wheel bearing is bad..i believe thats why my abs and brake light are on but could that speedo sensor in the passenger side cause my problem? What does it do.
 
Reply
Old Nov 29, 2012 | 10:16 AM
  #55  
Wilson01960196's Avatar
Wilson01960196
Thread Starter
|
Rookie
Joined: Oct 2012
Posts: 92
Likes: 0
Default

Originally Posted by Wilson01960196
i am replacing my passenger side hub friday..the wheel bearing is bad..i believe thats why my abs and brake light are on but could that speedo sensor in the passenger side cause my problem? What does it do.
Bump..
 
Reply
Old Nov 29, 2012 | 11:43 AM
  #56  
Izero's Avatar
Izero
Champion
Joined: Aug 2006
Posts: 4,489
Likes: 4
From: New Jersey
Default

Originally Posted by Wilson01960196
i am replacing my passenger side hub friday..the wheel bearing is bad..i believe thats why my abs and brake light are on but could that speedo sensor in the passenger side cause my problem? What does it do.

That is definitely a possibility. Have it all replaced and let us know.
 
Reply
Old Nov 29, 2012 | 07:45 PM
  #57  
Wilson01960196's Avatar
Wilson01960196
Thread Starter
|
Rookie
Joined: Oct 2012
Posts: 92
Likes: 0
Default

Originally Posted by Izero
That is definitely a possibility. Have it all replaced and let us know.
ok i went ahead and changed it tonight so i can relax all weekend and my abs light and brake light have both went off abd so far my speedo is doing fine!!! (Knock on wood) i let the truck get warmed up and got it hot enough in the cab i had to step out into 20it degree weather to cool off and speedo and turn signal are doing fine..tomorrow when its warmer out ill kno for sure but as of now no lights and everyrhing is fine!
 
Reply
Old Nov 30, 2012 | 06:35 AM
  #58  
Wilson01960196's Avatar
Wilson01960196
Thread Starter
|
Rookie
Joined: Oct 2012
Posts: 92
Likes: 0
Default

Originally Posted by Wilson01960196
ok i went ahead and changed it tonight so i can relax all weekend and my abs light and brake light have both went off abd so far my speedo is doing fine!!! (Knock on wood) i let the truck get warmed up and got it hot enough in the cab i had to step out into 20it degree weather to cool off and speedo and turn signal are doing fine..tomorrow when its warmer out ill kno for sure but as of now no lights and everyrhing is fine!
well on my way to work this morning my lights came on for a min then my brake pedal got really stiff trying to slow down then the lights went back pff and the brakes are fine again??
 
Reply
Old Nov 30, 2012 | 08:36 AM
  #59  
Izero's Avatar
Izero
Champion
Joined: Aug 2006
Posts: 4,489
Likes: 4
From: New Jersey
Default

Might be some other sensors having some issues... I would see if you can get a dealer to take a ride with you while logging the computer inputs and outputs to see what sensor is giving you problem...

That would definitively tell you what the issue most likely is.

I wouldn't risk it doing the DIY Diagnosis anymore, specially with the brakes giving you problems like that... because you never know when you'll really need those brakes to work correctly...
 
Reply
Old Nov 30, 2012 | 10:02 AM
  #60  
Wilson01960196's Avatar
Wilson01960196
Thread Starter
|
Rookie
Joined: Oct 2012
Posts: 92
Likes: 0
Default

Originally Posted by Izero
Might be some other sensors having some issues... I would see if you can get a dealer to take a ride with you while logging the computer inputs and outputs to see what sensor is giving you problem...

That would definitively tell you what the issue most likely is.

I wouldn't risk it doing the DIY Diagnosis anymore, specially with the brakes giving you problems like that... because you never know when you'll really need those brakes to work correctly...
I agree! The brakes did this once before as soon as i bought it and it was the sensor on the rear diff..fortunately i bought 2 of them just incase so im gonna put it in this evening and see what happens..worst thats gonna happen is i waste 5min of my time
 
Reply



All times are GMT -4. The time now is 05:00 PM.