When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I'm looking to install a in line fuel filter but have no clue where to start or buy one? Fairly good at turning a wrench. Just need some help to get started. I just went thought the injector fuel rail cleaning. Don't want to do it again if I can help it.
With all the stuff they are putting in the fuels, you have to do PM more often. Try this now that its clean once a month run a can of seafoam through it. You can also pick up some startron (walmart has it). It kills the ethonol in the fuel.
I got the truck used at 65k on it got 74 now. I did run sea foam and stp through it. I think that's what broke all that gunk loose. But I still don't understand how there's a filter in the tank. Is it one of the plastic screen lookin thing that caught nothing. And honestly changing a $20 in line filter is cheaper than buying new injectors at $50 each. Had to get 2 they was complete clogged.
I've got 16 injectors sitting here. No need to buy new. If you had problems between 65k-75k you were definitely getting or using poor fuel.
Look in my signature and go to my gallery and find the fuel pump folder. In there, there are pics showing the filter. All newer style rides have filters in the tank now.
Poor fuel for sure, I've change service stations. The filter is what everyone calls a sock filter around here. I cleaned 6 of the 8 injectors 2 there was no hope for. Even used a sewing needle to try to get the stuff out but it had the injector needle jammed in the open position. Hence p0202 code. Even tried the battery trick.
No that's why I asked here if anyone has done it before and had success with it. I've searched around a bit and I'm not the only one asking how to do this. Does anyone know the psi in the fuel line?