When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I'm trying to locate two parts, I've searched the internet as best I can and have come up empty. The first is the connector for a heated seat switch, I'm told this is off of a 2005 Dodge Ram. The second is the rubber insert for the cubby. I've posted pictures below to show the type of switch and the cubby. Also, would I be able to use these switches to turn after market heaters on and off? Thanks!
Rear connector for heated seat switch Heated seat switch and cubby hole.
I'm trying to locate two parts, I've searched the internet as best I can and have come up empty. The first is the connector for a heated seat switch, I'm told this is off of a 2005 Dodge Ram. The second is the rubber insert for the cubby. I've posted pictures below to show the type of switch and the cubby. Also, would I be able to use these switches to turn after market heaters on and off? Thanks!
Rear connector for heated seat switch Heated seat switch and cubby hole.
You can use them to turn on aftermarket heated seats, if you know what the wires do for the factory switch. Let me see if I can help you find the connectors but the rubber mat is a no go i can tell you they much unless you find it out of another truck
You can use them to turn on aftermarket heated seats, if you know what the wires do for the factory switch. Let me see if I can help you find the connectors but the rubber mat is a no go i can tell you they much unless you find it out of another truck
I found the connectors. These are actually momentary switches. My current after market switches are toggle switches with LOW-OFF-HIGH is there a way to convert these to toggle versus momentary? Thanks.
I found the connectors. These are actually momentary switches. My current after market switches are toggle switches with LOW-OFF-HIGH is there a way to convert these to toggle versus momentary? Thanks.
I found the connectors. These are actually momentary switches. My current after market switches are toggle switches with LOW-OFF-HIGH is there a way to convert these to toggle versus momentary? Thanks.
I don't understand the answer? I want to try and use the stock switches but need to convert from momentary to toggle type switch. Is this possible?
You can't convert switches from momentary to toggle. it's *possible*, but, only if you have the manufacturing facilities...... you aren't going to do it at home.
02-04-2019 | 06:24 PM
Need help finding a part
