When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have a 2003 4.7 2wd Ram and I put a new timing kit in the engine and now it won't crank and my scanner is saying my timing advance is -64% and I don't know how to fix this I've bought new crankshaft /camshaft sensors all my marks are dead on point what else is tbere
No sir and it has plenty of pressure in the fuel line so I know fuel pumps working and the relay⁰.... I've got a cheap scanner that says timing advance is -64% is that what it should say
No sir and it has plenty of pressure in the fuel line so I know fuel pumps working and the relay⁰.... I've got a cheap scanner that says timing advance is -64% is that what it should say
Likely one of your sensors isn't plugged in, or has failed. If the engine ain't turnin', advance goes to default value. See what it says while the engine is cranking.
What components did your timing kit consist of?
Do you still have the old sensors? What brand sensors and plugs are you running?
Have you verified that you are getting spark?