Good news Flash for fuel saver light!!!!!
Thread Starter
|
Rookie
Joined: May 2009
Posts: 81
Likes: 0
There is now a option under settings onm my evic that says fuel saver light on or off never was there before , after seeing this Im now wondering if the falsh for the mds improvments may of had nothing to do with the light , I also did a veh build configuration on the trcuk since I added the steering wheel controls , Im going to see if we have any trucks at work on monday I can falsh to see if its the flash or the build restore
Thread Starter
|
Rookie
Joined: May 2009
Posts: 81
Likes: 0
CJDT: Question. Since you work for a dealer, is this update something Dodge sent out to the dealers like some of the other RRT. That is, when you bring the vehicle in they will then do the service. I got to take mine in, guess their is a recall for the AC control. I would like for them to do the flash at that time. I looked at my build sheet and the hemi engine is one of the EZD. My service advisor when I talked to him today gave me the impression he was not aware of the update. He was going to look up number 18-019-09 and see if it applies. Thanks for all your help.
Chrysler group has a new policy that we run the Wi Tech on all vehs that come in and make sure that all software on all the computers is uptodate
Captain
Joined: Feb 2009
Posts: 563
Likes: 0
From: AZ
There is now a option under settings onm my evic that says fuel saver light on or off never was there before , after seeing this Im now wondering if the falsh for the mds improvments may of had nothing to do with the light , I also did a veh build configuration on the trcuk since I added the steering wheel controls , Im going to see if we have any trucks at work on monday I can falsh to see if its the flash or the build restore
Thread Starter
|
Rookie
Joined: May 2009
Posts: 81
Likes: 0
yes doesnt matter when its made this falsh is for all 5.7 hemi trucks with mds , even if you allready have the light it fixes many issues