4th Gen Ram Tech 2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2009 Ram Hemi Superchips Tuning Released

Thread Tools
 
Search this Thread
 
Old May 10, 2010 | 07:16 PM
  #701  
War Horse's Avatar
War Horse
All Star
Joined: Jun 2009
Posts: 975
Likes: 0
From: San Antonio, TX
Default

Originally Posted by BULLRAM
War Horse, the one I posted is exactly what I ran BEFORE the T/M tune, it shifted great for me, try setting all what mine was on, there are a lot of us running that set up, not hard on the drive train, or engine, but strong enough to feel it.

Thanks, I'll give her a shot. I installed the 91 tune with MDS off and adjusted the rear gear to match and that alone was impressive. I can't wait to try your recommendations.
 
Reply
Old May 10, 2010 | 07:36 PM
  #702  
smokeNhope's Avatar
smokeNhope
Registered User
Joined: Apr 2009
Posts: 48
Likes: 0
From: Alberta
Default

Is anyone running an aFe (or other) cold air intake with the 93 tune? I was just wondering if there is any chance this will cause a lean condition or if the engine computer will compensate for it... I know Superchips says it is all good to use with exhaust or CAI but I was just wondering if anyone had some real life experience with this/ or had the truck on a dyno to show A/F ratio...
 
Reply
Old May 10, 2010 | 07:40 PM
  #703  
War Horse's Avatar
War Horse
All Star
Joined: Jun 2009
Posts: 975
Likes: 0
From: San Antonio, TX
Default

Alright, changes are being uploaded into the truck right now. The only thing I was a little fuzzy on was the tire size. I have the P275/60R20s so after doing the math I came up with 33.469 as the tire size. So, I put in the programmer a size of 33.50 since that was as close as it'd let me get.
 
Reply
Old May 10, 2010 | 07:51 PM
  #704  
SilsHemi's Avatar
SilsHemi
Thread Starter
|
All Star
Joined: Dec 2005
Posts: 809
Likes: 0
From: GA
Default

Originally Posted by War Horse
Alright, changes are being uploaded into the truck right now. The only thing I was a little fuzzy on was the tire size. I have the P275/60R20s so after doing the math I came up with 33.469 as the tire size. So, I put in the programmer a size of 33.50 since that was as close as it'd let me get.
If you have stock tires, leave the tire size option alone.


Sil
 
Reply
Old May 10, 2010 | 08:41 PM
  #705  
M15's Avatar
M15
Veteran
Joined: Nov 2006
Posts: 433
Likes: 0
From: Temecula,CA.
Thumbs up

Just noticed that the new update cured the idle surge problem I was having.
 
Reply
Old May 10, 2010 | 10:00 PM
  #706  
Sobomaster's Avatar
Sobomaster
Record Breaker
Joined: Feb 2007
Posts: 1,564
Likes: 0
From: Austin/Round Rock, TX
Default

Originally Posted by War Horse
Alright, changes are being uploaded into the truck right now. The only thing I was a little fuzzy on was the tire size. I have the P275/60R20s so after doing the math I came up with 33.469 as the tire size. So, I put in the programmer a size of 33.50 since that was as close as it'd let me get.
Get a tape measure. Guaranteed your tires aren't 33.469 as they sit on your truck. You'll want to re-adjust the speedo.
 
Reply
Old May 10, 2010 | 10:22 PM
  #707  
M15's Avatar
M15
Veteran
Joined: Nov 2006
Posts: 433
Likes: 0
From: Temecula,CA.
Default

Ok my shift points are set at 6,000. Why am I shifting at only 5500?
 
Reply
Old May 11, 2010 | 12:47 AM
  #708  
bambohunter's Avatar
bambohunter
Registered User
Joined: Jul 2009
Posts: 29
Likes: 0
Default

will the superchips programmes make my truck down shift harder and better? right now when i nail the throttle my truck doesnt act like its down shifting
 
Reply
Old May 11, 2010 | 06:19 PM
  #709  
guitarvenue's Avatar
guitarvenue
Registered User
Joined: Dec 2005
Posts: 46
Likes: 0
Talking goodyear tire specs

Originally Posted by War Horse
Alright, changes are being uploaded into the truck right now. The only thing I was a little fuzzy on was the tire size. I have the P275/60R20s so after doing the math I came up with 33.469 as the tire size. So, I put in the programmer a size of 33.50 since that was as close as it'd let me get.
Tire Size Service Description Sidewall Approved Rim Width
(inches) Meas. Rim Width (inches) Section Width (inches) Outside Diameter (inches) Max Load (lbs)
P275/60R20 114S OWL 7.5 - 9.5 8.00 11.0 33.0 2,601 @ 35


Goodyear site 33 inch
 
Reply
Old May 11, 2010 | 06:21 PM
  #710  
Sobomaster's Avatar
Sobomaster
Record Breaker
Joined: Feb 2007
Posts: 1,564
Likes: 0
From: Austin/Round Rock, TX
Default

Originally Posted by guitarvenue
Tire Size Service Description Sidewall Approved Rim Width
(inches) Meas. Rim Width (inches) Section Width (inches) Outside Diameter (inches) Max Load (lbs)
P275/60R20 114S OWL 7.5 - 9.5 8.00 11.0 33.0 2,601 @ 35


Goodyear site 33 inch
And I wouldn't be surprised if they're closer to 32.5 mounted, inflated and under the weight of your truck.
 
Reply



All times are GMT -4. The time now is 03:25 PM.