When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
4th Gen Ram Tech2009 - 2018 Rams and the 2019 Ram Classic: This section is for TECHNICAL discussions only, that involve the 2009 - 2018 Rams and the 2019 Ram Classic. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
How well does the Volant seal to the fenderwell area? It's really hard to tell without an installed pic. The Airaid looks like it seals very well, just like the factory filter which I like, but I would rather buy the Volant because of the completely sealed airbox.
Doesnt seal too well at all, called dealer and was told it is that way because of the torque. Dont want it attached or will break when engine moves.
How well does the Volant seal to the fenderwell area? It's really hard to tell without an installed pic. The Airaid looks like it seals very well, just like the factory filter which I like, but I would rather buy the Volant because of the completely sealed airbox.
Its goes right into the factory punched holes in the fenderwell. Nice design.
Its goes right into the factory punched holes in the fenderwell. Nice design.
What kind of MPG's are you seeing with you CAI and muffler? Which mufflex do you have. I am trying to decide between the 24 and 18. Thanks
Back on topic can't decide between Volant and K&N. Does one work better than the other? Is one better if your off roading in terms of keeping the dust out? Thanks
I'm having issues finding a cold air intake for my 2010 Ram 1500. If anyone has some recommendations let me know. Part# would be great and any noticeable HP or torque gains. Thanks
There is no noticeable HP gains at all from any CAI without tuning adjustments to your fuel parameters. Here is a recommendation, just get a K&N drop in high-flow filter for 55.00 and the superchips flashpaq from Cabela's for 299.00. About the same price and you will get more than just noise..
Can you tell me the part # of your Voant CAI, you say it fits perfectly into the cut out in the wheel well. I and my son inlaw both have09 rams and the Volant CAI doesnt fit into the factory cut out. It sits slightly higher than the cut out leaving a 1 inch gap at the top. Dealer said this is normal.