Sunroof issue, any ideas?
Guest
Posts: n/a
Sunroof issue, any ideas?
Hi guys, I am at a loss on this one.
My sunroof has decided to stop sliding backwards. It still pops up and "wants" to slide backwards, but it wont go. almost like something is blocking its path, but I cant see anything or feel anything blocking it...
Has anyone else encountered this?
btw, its on an 07 SXT
My sunroof has decided to stop sliding backwards. It still pops up and "wants" to slide backwards, but it wont go. almost like something is blocking its path, but I cant see anything or feel anything blocking it...
Has anyone else encountered this?
btw, its on an 07 SXT
Guest
Posts: n/a
update, they have no idea whats wrong with it. they told me it was "broken" but when I asked what was broke, they couldnt tell me...
my line: "well no crap it's broke. why would I bring it here if it was fine?"
they wanted me to pay 900 to have a new one installed... yeah, no thanks.
my line: "well no crap it's broke. why would I bring it here if it was fine?"
they wanted me to pay 900 to have a new one installed... yeah, no thanks.
Trending Topics
Search Result
Vehicle Issue Sunroof inoperative, new sunroof motor installed and will not calibrate correctly.;Dealer has attempted to time the new motor and the operation is not correct.
System or Component Abnormal Behavior / Function,Inoperative,Will Not Program;Customer Concern (No DTCs),New / Remanufactured Part,Part Does Not Function Properly;Power Sunroof,Sunroof / Sunshade;Yes - Continuously
Recommendation MOTOR - SUNROOF WITH CONTROL UNIT DRIVE MOTOR TEACH PROCEDURE REPLACEMENT DRIVE MOTOR 1. Press and hold the sunroof close switch until the sunroof glass moves into the vent position and automatically reverses slightly and stops in the vent position. 2. Release sunroof switch. 3. Within five seconds of releasing sunroof switch, press and hold the sunroof close switch again until the sunroof glass fully cycles and returns to the closed position. 4. Release sunroof switch. Sunroof will now operate normally. ORIGINAL DRIVE MOTOR 1. Press and hold the sunroof close switch until the sunroof stops at the closed position. 2. Release sunroof switch. 3. Press and hold sunroof close switch once again for at least 10 seconds. After 10 seconds of pressing the close switch the sunroof glass will automatically move into the vent position and stop. 4. Release sunroof switch. 5. Within five seconds of releasing the sunroof switch, press and hold the sunroof close switch again until the sunroof glass fully cycles and returns to the closed position. 6. Release sunroof switch. The sunroof will now operate normally.
Try this first,it maybe just out of time or something did break.
Vehicle Issue Sunroof inoperative, new sunroof motor installed and will not calibrate correctly.;Dealer has attempted to time the new motor and the operation is not correct.
System or Component Abnormal Behavior / Function,Inoperative,Will Not Program;Customer Concern (No DTCs),New / Remanufactured Part,Part Does Not Function Properly;Power Sunroof,Sunroof / Sunshade;Yes - Continuously
Recommendation MOTOR - SUNROOF WITH CONTROL UNIT DRIVE MOTOR TEACH PROCEDURE REPLACEMENT DRIVE MOTOR 1. Press and hold the sunroof close switch until the sunroof glass moves into the vent position and automatically reverses slightly and stops in the vent position. 2. Release sunroof switch. 3. Within five seconds of releasing sunroof switch, press and hold the sunroof close switch again until the sunroof glass fully cycles and returns to the closed position. 4. Release sunroof switch. Sunroof will now operate normally. ORIGINAL DRIVE MOTOR 1. Press and hold the sunroof close switch until the sunroof stops at the closed position. 2. Release sunroof switch. 3. Press and hold sunroof close switch once again for at least 10 seconds. After 10 seconds of pressing the close switch the sunroof glass will automatically move into the vent position and stop. 4. Release sunroof switch. 5. Within five seconds of releasing the sunroof switch, press and hold the sunroof close switch again until the sunroof glass fully cycles and returns to the closed position. 6. Release sunroof switch. The sunroof will now operate normally.
Try this first,it maybe just out of time or something did break.
Guest
Posts: n/a
Edited to make easier to read/understand...
SUNROOF WITH CONTROL UNIT DRIVE MOTOR TEACH PROCEDURE
ORIGINAL DRIVE MOTOR
1. Press and hold the sunroof close switch until the sunroof stops at the closed position.
2. Release sunroof switch.
3. Press and hold sunroof close switch once again for at least 10 seconds. After 10 seconds of pressing the close switch the sunroof glass will automatically move into the vent position and stop.
4. Release sunroof switch.
5. Within five seconds of releasing the sunroof switch, press and hold the sunroof close switch again until the sunroof glass fully cycles and returns to the closed position.
6. Release sunroof switch. The sunroof will now operate normally.
REPLACEMENT DRIVE MOTOR
1. Press and hold the sunroof close switch until the sunroof glass moves into the vent position and automatically reverses slightly and stops in the vent position.
2. Release sunroof switch.
3. Within five seconds of releasing sunroof switch, press and hold the sunroof close switch again until the sunroof glass fully cycles and returns to the closed position.
4. Release sunroof switch. Sunroof will now operate normally.
Notes:
Sunroof close switch refers to the “front button” (closest to windshield) on the sunroof control switch.
Full credit goes to mastertech, I just edited what he posted.
SUNROOF WITH CONTROL UNIT DRIVE MOTOR TEACH PROCEDURE
ORIGINAL DRIVE MOTOR
1. Press and hold the sunroof close switch until the sunroof stops at the closed position.
2. Release sunroof switch.
3. Press and hold sunroof close switch once again for at least 10 seconds. After 10 seconds of pressing the close switch the sunroof glass will automatically move into the vent position and stop.
4. Release sunroof switch.
5. Within five seconds of releasing the sunroof switch, press and hold the sunroof close switch again until the sunroof glass fully cycles and returns to the closed position.
6. Release sunroof switch. The sunroof will now operate normally.
REPLACEMENT DRIVE MOTOR
1. Press and hold the sunroof close switch until the sunroof glass moves into the vent position and automatically reverses slightly and stops in the vent position.
2. Release sunroof switch.
3. Within five seconds of releasing sunroof switch, press and hold the sunroof close switch again until the sunroof glass fully cycles and returns to the closed position.
4. Release sunroof switch. Sunroof will now operate normally.
Notes:
Sunroof close switch refers to the “front button” (closest to windshield) on the sunroof control switch.
Full credit goes to mastertech, I just edited what he posted.