91 Stealth SOHC wont start
#1
91 Stealth SOHC wont start
So far I have put a new ECU, new distributor, MAF sensor and it wont start.
This stealth has the single coil and distributor not a coil pack.
It has no spark - out of the coil it shows 12 volts but it goes into distributor and dissapears. I though coils should put out alot more volts but I have been told it is correct.
I am guess now its either a relay (I cant hear injectors clicking either) or the cam position sensor or a coil.
Please help - it is sooo frustrating and I cant afford to take it to the stealership.
I dont know where relays or cam position sensor are located either to clean wires and check the part. If you could tell me what and where it would be GREATLY appreciated.
This stealth has the single coil and distributor not a coil pack.
It has no spark - out of the coil it shows 12 volts but it goes into distributor and dissapears. I though coils should put out alot more volts but I have been told it is correct.
I am guess now its either a relay (I cant hear injectors clicking either) or the cam position sensor or a coil.
Please help - it is sooo frustrating and I cant afford to take it to the stealership.
I dont know where relays or cam position sensor are located either to clean wires and check the part. If you could tell me what and where it would be GREATLY appreciated.
#2
RE: 91 Stealth SOHC wont start
also here is a little something hard to find, its the technical information manual online for a 91 stealth all models:
http://www.team3s.com/STIM91/STIM91.htm
http://www.team3s.com/STIM91/STIM91.htm
#3
RE: 91 Stealth SOHC wont start
http://www.stealth316.com/0-frames.htm have some technical info that might help you.
Check all the connections at the distributer and make sure everything plugged in correctly. As far as cam position sensor if nobody answers by the time i'm back at my apartment i will look up in my manual.
Check all the connections at the distributer and make sure everything plugged in correctly. As far as cam position sensor if nobody answers by the time i'm back at my apartment i will look up in my manual.
#4
RE: 91 Stealth SOHC wont start
All connects are good at the distributor - everything plugged in correctly. I should add this...The problem started after I unplugged the MAF sensor while it was running and shortly after plugged it back in while it was still running. Over the next couple days it got harder and harder to start until it decided to stall while running and never started again. I have added the parts |I listed in post 1 since that time.
#7
Trending Topics
#10