5.9L Engine Club
#201
10-28-2009, 10:51 PM
Registered User
Join Date: Oct 2009
Location: Port St Lucie,FL
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
could this be why mine feels slow and has no *****? IDK,i just got it and im new to rams.... oh i also loose a quart of oil every 1,000 miles
#203
10-29-2009, 01:06 PM
Grand Champion
#204
10-29-2009, 01:36 PM
Captain
Join Date: Dec 2008
Location: beaver dam, wi
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
I did this mod myself for the first time in 2007 and it took me all day. The drivers side was a pain to do, passengers side was easy since I removed my cai.
If you want to see how my instal went just go to dtw and look under magnum in the forums section then look for the title HS 1.7 RR, "NeedYourAdvice, "Please"
johnny.
If you want to see how my instal went just go to dtw and look under magnum in the forums section then look for the title HS 1.7 RR, "NeedYourAdvice, "Please"
johnny.
dosnt look to bad.. did you do one side at a time the torque to spec? or did you do them in the firing order and rotate engine to just past tdc? now the only thing i gotta do is figure out how to break loose exhaust manifold bolts that have never been undone in 260,000 with out snapping them off.
i think the hughes airgapper the rollers and a cai wich i have but mite get a kn and a set of headers with a sct tune may be the way to go till i can get my supercharger.
#205
10-29-2009, 07:27 PM
or install this for even more power http://www.hughesengines.com/Index/p...=&partid=24773
this is what i got MAJOR difference
#207
10-31-2009, 11:06 AM
Grand Champion
#208
10-31-2009, 12:42 PM
im doing a complete rebuild in March/April. Im beefing the tranny up. and redoing the motor. complete exhaust system. intake manifold, cylinder heads, pistons/rings, camshaft...all the above. i needed to do this now because my plenum was badly leaking.
but wait until i get it done. ill post pics of everything, because im challenging it all myself. (except the machining that has to get done)
but wait until i get it done. ill post pics of everything, because im challenging it all myself. (except the machining that has to get done)
#209
10-31-2009, 11:49 PM
Captain