P0731 code w/ no od???? help????
#1
P0700 and 0731 code w/ no od???? help????
Hi all,
I have a 2000 4x4 Durango 4.7
zone gave me a code of p0731
"incorrect gear 1 ratio" ---- what the heck is this?
also I have noticed now that it will not go into OD so Im pushing 3.4 RPMS at 70mph (BYE GAS)
at idle it will ramp up and down at times, but not consitant.
one last thing
when backing up it make a grinding noise in the rear ( I have my ideals as to what this is) but just want to see what you all think
with all of this Im more worried about the code and the OD issue, I have read about the OD sensor and the TPS and the gov sen
please ANY info from you will greatly help me to love my D again...
I have a 2000 4x4 Durango 4.7
zone gave me a code of p0731
"incorrect gear 1 ratio" ---- what the heck is this?
also I have noticed now that it will not go into OD so Im pushing 3.4 RPMS at 70mph (BYE GAS)
at idle it will ramp up and down at times, but not consitant.
one last thing
when backing up it make a grinding noise in the rear ( I have my ideals as to what this is) but just want to see what you all think
with all of this Im more worried about the code and the OD issue, I have read about the OD sensor and the TPS and the gov sen
please ANY info from you will greatly help me to love my D again...
Last edited by bandmaria; 07-23-2009 at 02:32 PM.
#5
#7
Trending Topics
#9
Warranties are a great piece of mind but remember you still have to pay for install. I don't have anything against Jasper Transmissions.
Install a Transgo Shift Kit and order it also with a NEW over sized torque converter and don't do rebuilt TQ convertors. Also a new radiator........ IMHO
Install a Transgo Shift Kit and order it also with a NEW over sized torque converter and don't do rebuilt TQ convertors. Also a new radiator........ IMHO
#10