Help! I have removed all the bolts to a right fender on a 2001 dodge durango. I also removed the fender flare, but it still won't budge. Help!

 

Welcome to DF
REMOVAL
Disconnect battery negative cable.
Raise and support the vehicle.
Remove right front wheel.
Remove wheel opening molding.
Remove wheelhouse liner.
Remove right headlamp module.
Remove air cleaner element housing.
Remove powertrain control module.
Disengage clips attaching wire harnesses to inner fender and wheelhouse.
Remove bolt attaching fender to lower rocker panel.
Remove bolts attaching fender to lower radiator closure panel (FRONT FENDER).
Remove bolts attaching fender to hood hinge support bracket.
Remove bolts attaching fender to upper cowl.
Remove bolts attaching fender to upper radiator closure panel.
Separate fender and wheelhouse from vehicle.

 

Or... run a chain from the fender to a staionary object, like a really big rock!
Put vehicle in reverse
Stomp on gas pedal
Rip fender off!

 

DAN!!!!! stop causing trouble, hes gotta be trying to remove it without doing any extra damage

 

Thanks for your help. I got it. Yipee!!

 

Sowwy...

 

Lmao!

 

about to do this too but i have one quick question before i get started

should i paint it before i put it on? prime it atleast? it needs to go from red to silver and i was planning on doing it myself somehow ofcourse

 

i would paint the fender before installing it unless you plan to have the entire truck painted, then i would paint the engine side before putting it on bc that side is very difficult to do once installed.

 

+1 Shrp