really need a help, harmonic balancer
#1
really need a help, harmonic balancer
OK any body have any ideas on getting this balancer off i have broken a 3" puller and ripped the threads out of a 4" puller. bent the bolt whenthe first puller broke. Now Im going to put attach the 3 claws from the 4" puller to an 8" gear puller ( the 8" claws wont fit in the holes ).
#2
#3
RE: really need a help, harmonic balancer
ORIGINAL: spudsterier
go to autozone and rent the proper puller....its a small 3 jaw that uses a push rod as the center push point...it will only take about 2 minuites to get the pulley off using that puller
go to autozone and rent the proper puller....its a small 3 jaw that uses a push rod as the center push point...it will only take about 2 minuites to get the pulley off using that puller
#4
#7
RE: really need a help, harmonic balancer
On my 95 motor thats been sitting in 2 inches of water for the last 2 years the pully popped right off the way you'd expecta new oneto, VERY EASY. The pully on my old sohc that I had off not more than 8 months ago is still on the motor, I broke the timing cover and took the belt out over the pully, it sucks but when your running out of day light on a Engine swap you do anything!
Trending Topics
#8
#10
RE: really need a help, harmonic balancer
I attached the 4" jaws to a 8" puller with titanium bolts and alot of kroil did the trick. I made some plates to go between the EGR valve and the exhaust manifold and one between the tube and intake, let me know if any one has a problem after doing this, I think it will work well and the EGR valve will sill be there.