2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Taking off o2 sensor?

Thread Tools
 
Search this Thread
 
  #1  
Old 10-05-2010, 09:52 PM
chadp13's Avatar
chadp13
chadp13 is offline
Registered User
Thread Starter
Join Date: Oct 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Taking off o2 sensor?

2000 Dakota SLT, 3.9 magnum. Basically I want my truck to be louder. My thought was of taking the o2 sensor off-therefore there would be a hole in the cat. I was wondering if this is bad for anything?


Along with this now that i think of it, my truck seems to run a little rough, and the engine light is on, is it possible that it is the o2 sensor?


Thanks- Chad
 
  #2  
Old 10-05-2010, 10:06 PM
thunder98110's Avatar
thunder98110
thunder98110 is offline
Champion
Join Date: Mar 2009
Location: DC
Posts: 4,084
Likes: 0
Received 6 Likes on 6 Posts
Default

you want to remove the o2 sensor and leave it out? dont.... just get a new exhaust if you want it louder.
 
  #3  
Old 10-05-2010, 10:14 PM
chadp13's Avatar
chadp13
chadp13 is offline
Registered User
Thread Starter
Join Date: Oct 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Is it bad for the truck? Im looking into a 40 series flowmaster, but their 80 bucks, and i am currently broke.
 
  #4  
Old 10-05-2010, 10:18 PM
thunder98110's Avatar
thunder98110
thunder98110 is offline
Champion
Join Date: Mar 2009
Location: DC
Posts: 4,084
Likes: 0
Received 6 Likes on 6 Posts
Default

well if its the rear o2 sensor its only for emissions but its just like having a hole in your exhaust. just cut off your exhaust before the muffler. cheap and loud.
 
  #5  
Old 10-05-2010, 10:39 PM
chadp13's Avatar
chadp13
chadp13 is offline
Registered User
Thread Starter
Join Date: Oct 2010
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm kinda new at this, but i thought there was only 1 o2 sensor ( on the cat) at least thats all i seen? And i just wanna take it off and see if it sounds nice (even though i can never get the v8 sound) I would like to keep it with the o2 sensor off until i get a Flowmaster if it doesn't hurt
 
  #6  
Old 10-05-2010, 10:46 PM
thunder98110's Avatar
thunder98110
thunder98110 is offline
Champion
Join Date: Mar 2009
Location: DC
Posts: 4,084
Likes: 0
Received 6 Likes on 6 Posts
Default

its not going to sound good, not all of the exhaust is going to go through that little hole, its going to sound like u have an exhaust leak.

well the there are lik 3 pre cats at least on the 4.7's. but thoes are for a/f ratios and should not be messed with.
 
  #7  
Old 10-05-2010, 10:58 PM
KillerKilgore's Avatar
KillerKilgore
KillerKilgore is offline
Professional
Join Date: Jul 2010
Location: Eastern Bluegrass
Posts: 207
Received 0 Likes on 0 Posts
Default

@Chadp13

to answer your question YES it will hurt your engine.

think of it this way
O2 sensor #1, cat, O2 sensor #2

the computer compares the readings of #1 and #2 and adjust the fuel mixture.

If there is no reading from #2, or readings way out of sync with other, the fuel mixture will be way off.

this is the same reason you can't get rid of the cat either.

hope this helps

KillerKilgore
 
  #8  
Old 10-05-2010, 11:03 PM
thunder98110's Avatar
thunder98110
thunder98110 is offline
Champion
Join Date: Mar 2009
Location: DC
Posts: 4,084
Likes: 0
Received 6 Likes on 6 Posts
Default

not true, the rear cat is stricly for emissions, as long as the rear or last o2 sensor has a differnet reading from the others its fine. you can remove the cat w/o problems. its just removing the o2 sensor isnt going to make the exhaust louder.

the pre cats are the ones that adjust a/f
 
  #9  
Old 10-05-2010, 11:21 PM
KillerKilgore's Avatar
KillerKilgore
KillerKilgore is offline
Professional
Join Date: Jul 2010
Location: Eastern Bluegrass
Posts: 207
Received 0 Likes on 0 Posts
Default

Originally Posted by thunder98110
not true, the rear cat is stricly for emissions, as long as the rear or last o2 sensor has a differnet reading from the others its fine. you can remove the cat w/o problems. its just removing the o2 sensor isnt going to make the exhaust louder.

the pre cats are the ones that adjust a/f
Agree that removing the O2 sensor is just going to make it sound like it has an exhaust leak.

BUT think about it, if there is an O2 behind the cat it is telling the computer adjust the fuel mix and if it is still to rich that is why it won't pass emissions.

if the cat is gone the reading are going to be the same and computer is going try to lean out the mix again and again.

if the last O2 sensor gives a reading of too lean the computer is going to try to make the mix rich.

I won't swear to this reasoning but this is the way I understand it.
That's my story and I'm stickin' to it.

I really don't have to worry about emissions here in KY but you do in WVa which is 1/2 mile away.
KillerKilgore
 

Last edited by KillerKilgore; 10-05-2010 at 11:24 PM.
  #10  
Old 10-05-2010, 11:30 PM
thunder98110's Avatar
thunder98110
thunder98110 is offline
Champion
Join Date: Mar 2009
Location: DC
Posts: 4,084
Likes: 0
Received 6 Likes on 6 Posts
Default

do the 3.9's have an o2 sensorAFTER the cat? my 4.7 only one before. i thought the rears after cat only moniter if the cats working. but it dosent matter to me b.c i dont have inspection anyways
 


Quick Reply: Taking off o2 sensor?



All times are GMT -4. The time now is 01:16 AM.