2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

O2 sensors, multiple misfires in all cylinders problems

Thread Tools
 
Search this Thread
 
  #1  
Old 01-22-2015, 10:37 PM
rut250's Avatar
rut250
rut250 is offline
Amateur
Thread Starter
Join Date: Jan 2015
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Default O2 sensors, multiple misfires in all cylinders problems

2002 2wd dakota 3.9. same problems. started fue months ago with replacing 2 o2 sensor(bank 1 s 2(down stream),and bank 2 s1(upstream) with aftermarket ones on ebay. it ran like crap after. it turns out dodge dont work well with anything els but mopar. i replaced o2 sensor bank 2 sensor1(upstream) with a mopar part, worked very well for about 2 months. on the way form work it backfireing poping no power(day 1) ran a scan it said running rich bank1, multuple cylender missfire(1,3,5) small vacume leak. so i cleared the codes to see what new codes will appear.(day 2) took the truck for a drive and it happened again same codes but different cylinders(2,4,6) also small vacume leak. i dont think theres alot wrong(im thinking about replacing upstrem (and ebay crap downstream) o2 sensor for bank 1 might solve the problem, sounds like gas/air problem to me. anyone els got any sugestions
 
  #2  
Old 01-22-2015, 10:49 PM
Vladek's Avatar
Vladek
Vladek is offline
Veteran
Join Date: Apr 2012
Location: Grafton Il.
Posts: 265
Likes: 0
Received 2 Likes on 2 Posts
Default

ntk/ngk are the best o2 sensors for the our trucks. dakotas do not like bosh for some reason.
 
  #3  
Old 01-22-2015, 10:59 PM
jkeaton's Avatar
jkeaton
jkeaton is offline
DF Admin
Dodge Forum Administrator
Join Date: Apr 2010
Location: Winston Salem, NC
Posts: 27,835
Received 349 Likes on 310 Posts
Default

Moving to the correct section.
 
  #4  
Old 01-22-2015, 11:02 PM
rut250's Avatar
rut250
rut250 is offline
Amateur
Thread Starter
Join Date: Jan 2015
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Default

do u thing the o2 sensor is the problem
 
  #5  
Old 01-22-2015, 11:50 PM
magnethead's Avatar
magnethead
magnethead is offline
Legend
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 8,008
Received 169 Likes on 154 Posts
Default

how many miles? I get 1/3/5 on mine but i run a very modified timing map. I am wondering if your (and mine) timing chain has stretched just enough that the sync sensors arent picking up on it, but it's throwing the dizzy & valves off just enough to trip O2's.
 
  #6  
Old 01-23-2015, 12:07 AM
rut250's Avatar
rut250
rut250 is offline
Amateur
Thread Starter
Join Date: Jan 2015
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Default

159 000 kms... About 100 000 miles
 
  #7  
Old 01-23-2015, 09:25 AM
00DakDan's Avatar
00DakDan
00DakDan is offline
Section Moderator
Dodge Forum Moderator
Join Date: Dec 2010
Location: MA
Posts: 4,830
Likes: 0
Received 38 Likes on 34 Posts
Default

How are the plugs, cap, rotor, air filter? Pull a plug and check it out. Could be a coil problem too.

Then check for a vacuum leak.

Odds are the multiple misfires are causing the "running rich" codes.
 
  #8  
Old 01-23-2015, 09:32 AM
00DakDan's Avatar
00DakDan
00DakDan is offline
Section Moderator
Dodge Forum Moderator
Join Date: Dec 2010
Location: MA
Posts: 4,830
Likes: 0
Received 38 Likes on 34 Posts
Default

Welcome to the forum Rut.

I deleted the duplicate "turnip" thread.
 
  #9  
Old 01-23-2015, 01:37 PM
rut250's Avatar
rut250
rut250 is offline
Amateur
Thread Starter
Join Date: Jan 2015
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Default

New plugs and plugs about20,000 km ago
 
  #10  
Old 01-23-2015, 03:33 PM
rut250's Avatar
rut250
rut250 is offline
Amateur
Thread Starter
Join Date: Jan 2015
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Default

New plugs and wires
 


Quick Reply: O2 sensors, multiple misfires in all cylinders problems



All times are GMT -4. The time now is 10:07 PM.