2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

greenhorn

Thread Tools
 
Search this Thread
 
  #1  
Old 01-04-2014, 10:29 AM
WD-40's Avatar
WD-40
WD-40 is offline
Registered User
Thread Starter
Join Date: Jan 2014
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default Trouble down south

Hello once again, my dakota (1998 2wheel, 3.9L) has been giving me some trouble lately.Try to make this short and sweet and short. It is cutting off while driving down the road, sometimes stalling even when sitting still.Changed spark plugs, wires, air filter, cat converter{professional shop}, distributor cap, rotor, checked the throttle position sensor,had 2mechs look at it, they are stumped, one said it was my pcm.Got a trouble code 0420, annnnnnddddd.... well do not know what else to do. Checked the ASD relay it is working great, I can hear the fuel pump kicking in when ignition is switched to the on position, fuel pessure gauge reading was good,annnndddd..... oh, no vaccum leaks,so I do not know. Can a new member get some help please.
 
  #2  
Old 01-04-2014, 10:54 AM
jkeaton's Avatar
jkeaton
jkeaton is offline
DF Admin
Dodge Forum Administrator
Join Date: Apr 2010
Location: Winston Salem, NC
Posts: 27,731
Received 335 Likes on 299 Posts
Default

Welcome to DF. Post your questions in the 2nd gen Dakota technical section. They will be able to help you out.
 
  #3  
Old 01-04-2014, 05:20 PM
WD-40's Avatar
WD-40
WD-40 is offline
Registered User
Thread Starter
Join Date: Jan 2014
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Can you move it for me or do I have to start all over with the questions in the dakota forum?
 
  #4  
Old 01-04-2014, 05:55 PM
WD-40's Avatar
WD-40
WD-40 is offline
Registered User
Thread Starter
Join Date: Jan 2014
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Unhappy trouble down south

Hello everybody I have 1998 dakota 2wheel 3.9L vehicle Make a long story short, the truck have been stalling and cutting off now for almost 2-3 weeks. Changed the spark plugs, wires distributor cap&rotor, air filter,switched to high-octane gas, had 2 mechs check it out, one said it was my pcm, other one said the truck has a ghost in it.Checked the throttle position sensor, it works great, can hear the fuel pump engage when switch is turned on, fuel pressure gage test was good, no vacuum leaks according to the second mech,Oh truck starts choking after 30-35 min ride to work then just shuts down, very difficult to restart{recrank} again, HHHHEEEELLLLLPPPPPP
 
  #5  
Old 01-04-2014, 05:58 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,768
Likes: 0
Received 3,178 Likes on 2,931 Posts
Default

Just copy/paste it into a post in the Dakota forum.
 
  #6  
Old 01-04-2014, 06:03 PM
WD-40's Avatar
WD-40
WD-40 is offline
Registered User
Thread Starter
Join Date: Jan 2014
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks HEY YOU
 
  #7  
Old 01-04-2014, 06:04 PM
jkeaton's Avatar
jkeaton
jkeaton is offline
DF Admin
Dodge Forum Administrator
Join Date: Apr 2010
Location: Winston Salem, NC
Posts: 27,731
Received 335 Likes on 299 Posts
Default

Moved for you.
 
  #8  
Old 01-04-2014, 08:07 PM
daksnbeers's Avatar
daksnbeers
daksnbeers is offline
Professional
Join Date: Sep 2012
Posts: 233
Likes: 0
Received 0 Likes on 0 Posts
Default

Could be the idle air control valve. When it stalls going down the road does it happen when you lift up off the accelerator?
 
  #9  
Old 01-04-2014, 08:33 PM
magnethead's Avatar
magnethead
magnethead is offline
Legend
Join Date: Feb 2005
Location: Fort Worth, TX
Posts: 7,935
Received 153 Likes on 140 Posts
Default

Any codes? Have you checked the IAC on back of the throttle body?
 
  #10  
Old 01-04-2014, 09:26 PM
00DakDan's Avatar
00DakDan
00DakDan is offline
Section Moderator
Dodge Forum Moderator
Join Date: Dec 2010
Location: MA
Posts: 4,830
Likes: 0
Received 36 Likes on 32 Posts
Default

I merged two threads together.
 


Quick Reply: greenhorn



All times are GMT -4. The time now is 12:27 AM.