When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
drove it... unhooked the post cat o2 sensor. exhaust melted though the wiring that i soldered in to make the wiring longer. still has some back firing though the throttle body under light throttle, but not as bad.
have codes for the pre cat sensor as well. so im going to get new o2's a pre made o2 sesnor extension, and a new crank, and cam sensor.
also pin pointed the coolant leak... time for a new radiator. gonna try to get the csf all aluminium one.
Replaced 1 rear shoe/drum, front calipers & Pads, got a 4x4 actuator on its way tomorow for 111.00, Gotta figure out what I am missing as I have a spare parts from the rear shoes -_-
Getting the materials ready to build another tiregate. Instead of one that sticks out im making one that sits low and still keep my abilities to haul the gooseneck around on occasion. Plus the other tiregate is rusting and im slight allergic to the galvanization on the pipe. Something like this: http://www.off-road.com/trucks-4x4/n...-ht-35676.html
Went to home depot with the RAM today and picked up some acrylic plexiglass im deciding to make my own clear lens similar to anzo. I did this to my old Ford Ranger and still looked new after a year.Gonna do a little more research before I go and take the headlights out though.lol Also thinking about making metal wheel covers for my rims and have them welded on there but im not sure yet. Still gotta find out how the weights on this rims are going to sit. And