When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
started the RAM up for the first time in 5 days...fired up first crank.
picked up the CAD gasket from the dealer, and got my pass. axle seal...tried bridging my speakers to my amp, but the system would cut out when volume was over 30? still trying to figure that out.
turn the gain down on the amp, thats a protect mode. it protects the amp in events such as over heating, over powering, underpowering, and short circuits
PEED OFF- dropped truck off at the shop up the road. was out on porch having a cig seen my truck flying down the road, so i waited to watch it come back up and they hammered it from the stop sign they let it wind all the way to 2nd let off and didnt hear anything for 5-7 secs and heard it wind up again im pissed!
Well, I started a couple days ago but I checked all my tracking numbers and before the end of the week I should have new rotors, brake pads, roller rockers, dual steering stabilizer, and a belt that bypasses a/c. Think I have a few more things to order then all I have to do is get the rest of the tools I need and I'll be able to put her down for a weekend. Oh and I need to start printing some DIY's....
they called said my ujoints and ball joints were bad driver side mirror needed replaced due to 1 crack! i dunno what else going to have to check out the bill tommorrow when i get it round about 600 dollars ! i brought it in for state inspection and emmisions