What Did You Do To Your 2ND GEN RAM Today?
#5981
#5982
I really want to keep this truck for a while, so to head off the New England salt season I spent a few hours today spraying the whole underside with 'fluid film'. Every nook and cranny I could slide the nozzle in, got loaded with it. The stuff will be running out of it for days.
#5983
The toyota guys swear by it.
#5984
told her she was getting a new plow..... brand new fisher 8' hd with the all new multiplex wiring. 4075.00 cant wait til february! fisher dealer down the road a piece told me for just the plow was 3800. called another guy and plow with all truck side wiring was 4075. my currently plow is holy. and not the godly kind either.
#5987
On a side note, since you are in Milford. Anytime you want or need help with some thing, take a ride to Raymond.
#5988
Remove the door panels, and use a vacuum and compressed air to clean out all the crap inside. Then spray the whole inside with that stuff. Do it once a year and your doors won't rot from the inside out.
On a side note, since you are in Milford. Anytime you want or need help with some thing, take a ride to Raymond.
On a side note, since you are in Milford. Anytime you want or need help with some thing, take a ride to Raymond.
I pulled all the door panels, the flares, and rear inner wheel well liners when I did it. I may have gone a little overboard on some spots, but I wanted to be sure of the coverage. I think I may spray along the top and sides of the stainless panels too.
#5989
#5990
I haven't touched the Ram since August, when I pulled the heads. I've been putting time in on my $500 beater -- a 1996 Crown Victoria that I picked up from a neighbor. It has 236K on it and the A/C is ICE COLD. I've been flushing the cooling system on it, fixing an oil leak and other various housekeeping issues. I should be driving it later this week so I can get new tires on it. After that, I'm dumping my Mazda.