For y'all:

http://www.youtube.com/watch?v=x2z37XIrME0

 

A-master - we want to hear the horn too! Cutout looks good!

 

Seconded!!!

 

thirded

where did you get the cutout from???

 

Horn Kit: http://trainhorns.net/hot-rods-delux...rain-horn.html

Cutout: http://www.ebay.com/itm/BadlanzHPE-E...#ht_984wt_1396

Next time I get out to the farm, I'll Getcha a vid of the horn.

 

Did a little more polishing (sanding) after work, and torqued bolts on trailer hitch that I installed over the weekend. Stripped a 1/2" nut before getting to 65#. Think I am going to replace all nuts with grade 8 nuts. It should not have stripped.

Hoping for good weather this weekend so I can shoot it with primer!

Also received parts I ordered Sunday from Wittrans. Going to change shims in OD when time allows. Mine was just bareley within lower end of tolerance of spec. Got the Sonnax shim kit along with the nest size shim. Sonnax has estra shims that are 0.010" so I can get it exactly whaat I need.

 

Well I rotated tires a little while ago and had a loose tie rod so I replaced it added a washer so it sat right

 

let the fun begin.

 

I replaced my serpentine belt

 

Installed my 52mm throttle body... now really rough idle, almost dies all the time. It was doing it a little before the install but now its all the time...
Here's the link to my thread if anyone wants to help!

https://dodgeforum.com/forum/2nd-gen...ough-idle.html