What Did You Do To Your 2ND GEN RAM Today?
#951
lets see, i bought a rough looking ram 1500, its lifted and has brand new 33' tires, i fixed the dome lights, the passenger seat slider, the rear window lock, and adjusted the front bumper... then drove it less than ten miles and hit a deer.. got to redo the bumper now, but at least the was no major damage.
#952
#954
New Cat..
Heard rattling from the exhaust.. Checked it out, had a broken hanger welded it and still heard some noise from the cat. Always thought other Rams with the same exhaust sounded better and loader then mine, now I know why. Replaced the cat with a universal and it sounds and runs alot better. It was the original so probly should have been replaced when it was still under extended warranty....
#956
Punked one of our neighbors this morning with the old truck. Seems they were throwing a party last night, and it kept going until about 5 am this morning. At 4, I had had enough, and went out in the field fairly close to their house, and cranked the system. Threw in my warm up CD that is nothing but mid and low range frequencies, and it will literally rattle seat bolts loose
They turned down their music.
They turned down their music.
#958
#959
niceeeee ^ i always get complaints on my loud music. everyone i know has a sick stereo and they happen to come over alot so it becomes a frequent problem lol.
but on topic:
I think im going to do the u joints in the front axles today. i can even drive it there so gone. either that or work on my 5.0
but on topic:
I think im going to do the u joints in the front axles today. i can even drive it there so gone. either that or work on my 5.0
#960
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
work i did yesterday.
-re-installed: diff cover, hubs, cad unit, calipers/rotors, front driveshaft, tires.
-drained the overfilled transfer case. don't ask, i really am gonna choke the tranny guy.
-replaced cracked tie rod boots with energy suspension boots, tie rod ends still feel good.
-refilled the front diff and cad unit and cranked it up and moved it a little and get the diff fluid on the gears/bearings.
today, walked outside and saw the muddy/gear oiley crap caked onto my tires from moving the truck last night, drain pans don't always catch it all. and i wasn't expecting 1-2 quarts of atf to come shooting out at me when i went to check the fluid level in the transfer case so i didn't have a drain pan for that.
-re-installed: diff cover, hubs, cad unit, calipers/rotors, front driveshaft, tires.
-drained the overfilled transfer case. don't ask, i really am gonna choke the tranny guy.
-replaced cracked tie rod boots with energy suspension boots, tie rod ends still feel good.
-refilled the front diff and cad unit and cranked it up and moved it a little and get the diff fluid on the gears/bearings.
today, walked outside and saw the muddy/gear oiley crap caked onto my tires from moving the truck last night, drain pans don't always catch it all. and i wasn't expecting 1-2 quarts of atf to come shooting out at me when i went to check the fluid level in the transfer case so i didn't have a drain pan for that.