The Official 2nd Gen RAM Forum OT thread
12-19-2013, 08:07 AM
All Star
That jeep would look nice all cleaned up. 
Still don't have good heat in the Ram. It gets warm but not comfortable warm.
Still don't have good heat in the Ram. It gets warm but not comfortable warm.
12-19-2013, 08:15 AM
All Star
Join Date: Sep 2012
Location: North Dakota
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody know off hand if Oddessa/ Clearwater heads on ebay has any Christmas deals coming up? Or would I have to call?
12-19-2013, 10:59 AM
Well my great looking truck isn't so great looking anymore....................Or at least on the passenger side it isn't. My family and I had gone down to California last weekend for a memorial service for my dad. Had zero issues on the way down other than when I got to Cal. I found out I had a blown axle seal on the rear axle.
We headed home Monday and we talked about driving straight thru like we had on the way down to Cal. but decided to stop and spend the night instead. Got up Tuesday morning and started driving but had to stop after about an hour because I wasn't feeling well. So the wife took over the driving duties which was fine. I was asleep when I awoken by a loud BANG........................!!!!! and bump only to see the center of a on and off ramp coming at me. The wife had hit some ice and had slid into the guard rail. Tore up the front bumper cover, bent the center support, broke the fog light lens and ripped off 1/3rd of the front fender flare. So that was the damage to the front. Next as she steered away from the front hitting the guard rail the rear took a beating too. Bent rear bumper, dented lower rear quarter panel, cracked rear fender flare, no longer round exhaust tip.
Good things out of all this is that no one was hurt. Sad part was that NO ONE stopped to see if we were OK.
Went to the body shop Friday and got the estimate on the repairs. More good news, The cost of the front bumper is about $1,800 and the rear is $700. So after my deductible I have $2,000 to use towards my front and rear bumpers. I am going to get the new Smittybuilt M1 bumpers front & rear plus run a 15,000lb Smittybuilt winch with the front bumper. Body shop can't get the truck in until 6 January so I have to drive it around for a few weeks all dented up.
We headed home Monday and we talked about driving straight thru like we had on the way down to Cal. but decided to stop and spend the night instead. Got up Tuesday morning and started driving but had to stop after about an hour because I wasn't feeling well. So the wife took over the driving duties which was fine. I was asleep when I awoken by a loud BANG........................!!!!! and bump only to see the center of a on and off ramp coming at me. The wife had hit some ice and had slid into the guard rail. Tore up the front bumper cover, bent the center support, broke the fog light lens and ripped off 1/3rd of the front fender flare. So that was the damage to the front. Next as she steered away from the front hitting the guard rail the rear took a beating too. Bent rear bumper, dented lower rear quarter panel, cracked rear fender flare, no longer round exhaust tip.
Good things out of all this is that no one was hurt. Sad part was that NO ONE stopped to see if we were OK.
Went to the body shop Friday and got the estimate on the repairs. More good news, The cost of the front bumper is about $1,800 and the rear is $700. So after my deductible I have $2,000 to use towards my front and rear bumpers. I am going to get the new Smittybuilt M1 bumpers front & rear plus run a 15,000lb Smittybuilt winch with the front bumper. Body shop can't get the truck in until 6 January so I have to drive it around for a few weeks all dented up.
My teenager rolled his Jeep yesterday from hitting a patch of black ice.... His is totalled. (he is ok though.)
Pics of the new bumpers and such when you get them installed.
Smiitybilt makes winches??
12-19-2013, 11:43 AM
12-19-2013, 11:54 AM
there's another member on there from cle elum as well that drives a second gen 24v
12-19-2013, 12:22 PM
Captain
Join Date: Jan 2011
Location: Northern Ontario
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
So today I've found out that my ex girlfriend from high school (who held a grudge over the years) is Parts Manager at the local dodge dealership. So now every time I have to go in there or call to get a part, I have to go through her. Why couldn't she work at the ford dealership? I'll never go in there :P
12-19-2013, 12:55 PM
So today I've found out that my ex girlfriend from high school (who held a grudge over the years) is Parts Manager at the local dodge dealership. So now every time I have to go in there or call to get a part, I have to go through her. Why couldn't she work at the ford dealership? I'll never go in there :P
Maybe if you had, she wouldn't be your ex-girlfriend
