Your Plenum Gasket Pictures -- Post Up
#21
Heres a pic of mine at 110k miles, gasket was blown in about 3 spots, replaced it with the hughes plenum kit, grade 8 bolts and mr gasket - gasket
Here a pic after scrubing it for about an hour with oven cleaner and stainless steel scrubbers
And heres a shot after I lightly sanded the keg and sprayed two coats of brake caliper red paint
And a pic installed with my 50mm tb (kegs a little dirty)
Here a pic after scrubing it for about an hour with oven cleaner and stainless steel scrubbers
And heres a shot after I lightly sanded the keg and sprayed two coats of brake caliper red paint
And a pic installed with my 50mm tb (kegs a little dirty)
#22
#23
#24
So you think it broke due to disassembly, like merc225hp?
Judging by the oil pattern on the pan though, it looks like it came through there and settled out in the fan like pattern. The majority of it seems to have pooled up towards the bottom, per your picture.
thanks for sharing!
Judging by the oil pattern on the pan though, it looks like it came through there and settled out in the fan like pattern. The majority of it seems to have pooled up towards the bottom, per your picture.
thanks for sharing!
#27
#29
Thanks dude. Tell your friends, tell you momma, your cousins, yadda yadda.
Make sure you link to this thread when ppl egregiously have not done their homework about evaluating their plenum gasket to see what one looks like in conjunction with the normal operation of the stupid little PCV!!
Make sure you link to this thread when ppl egregiously have not done their homework about evaluating their plenum gasket to see what one looks like in conjunction with the normal operation of the stupid little PCV!!
#30