Installed the smoked Recon Clearance Lights
#1
Installed the smoked Recon Clearance Lights
EDIT snapped some quick pics
.I must say it looks much better than i thought it would, and i had high expectations. Little nervous about drilling into the roof, but there were already pre-drilled holes from the factory, so it made the task significantly easier. Didnt even break anything! Headliner was a little tricky to take out as i don't have a four door, but with five half-drunk guys, it was only a minor set-back. again i'lll try to have some pics to come, but i promise you this, it looks MEAN.
.I must say it looks much better than i thought it would, and i had high expectations. Little nervous about drilling into the roof, but there were already pre-drilled holes from the factory, so it made the task significantly easier. Didnt even break anything! Headliner was a little tricky to take out as i don't have a four door, but with five half-drunk guys, it was only a minor set-back. again i'lll try to have some pics to come, but i promise you this, it looks MEAN.
#3
#4
#6
RE: Installed the smoked Recon Clearance Lights
Thetopof the cab has two "layers" , a lower layer the headliner, grab handles, clothes hooks, etc. connect to and then there is a upper "roof" layer. They are about 3/4" apart. The bottom layer had 5 holes about the size of a 50 cent piece for the factory cab lights. All i had to do was drill in the center of these holes through the upper layer (roof) and my lights were as perfectly aligned as the factory ones would be.
#7
Trending Topics
#9
RE: Installed the smoked Recon Clearance Lights
ORIGINAL: 20dodgeram01
installed clearance lights on mine awhile back.. might upgrade to the smoked out ones though to match everything
[IMG]local://upfiles/27172/FF8DA75B9F4242A9AA8636351909856F.jpg[/IMG]
installed clearance lights on mine awhile back.. might upgrade to the smoked out ones though to match everything
[IMG]local://upfiles/27172/FF8DA75B9F4242A9AA8636351909856F.jpg[/IMG]
#10
RE: Installed the smoked Recon Clearance Lights
ORIGINAL: jnellydodge
All i had to do was drill in the center of these holes through the upper layer (roof) and my lights were as perfectly aligned as the factory ones would be.
All i had to do was drill in the center of these holes through the upper layer (roof) and my lights were as perfectly aligned as the factory ones would be.
I've installed cablights on every truckI've owned. It must be the farm boy in me, but I don't consider a pickup complete till there's lights on the roof and a toolbox in the back!