Audio Gurus
Thread Starter
|
Professional
Joined: Apr 2008
Posts: 120
Likes: 0
From: Central MO
Understandable....but..the plastic is on the outside of the interior...keeping air from escaping...know what im saying?
Professional
Joined: Jan 2008
Posts: 191
Likes: 0
I'm going to have to take a new video of my current set-up. I have 2 runs of 0 gauge running from my battery to the back of my truck. I did the Big 3, replaced all grounds and wires from the alt to the battery with 0 guage. i have 300 amp fuses on each run, i had a set of Alpine SPX-17ref but i forgot to set the HPF and they were playing all the sub-sonic freq and they died a horrible death. So I replaced the 6.5 mids witht he phoenix gold RSD65CS but kept the Alpine tweeters and the Alpine crossovers. I am currently giving each door 150rms 
through an alpine PDX2.150 The best part is my sub, mmmm Fi Q powa! Fi Q 12" with BP in a 2.5cuft @ 32hz after displacement runnin off of a Clarion DPX 11551 @ 1600RMS @ 2ohms. **** ***** real hard, I need to fix my back window since it leaks from the pain this sub gives it. I was metered at 142dB im proud 
Back seat boxes suck, wish there was an easier way of getting a box set up without using 3/4 of my back seat. Ill post some pics and a video later today. Oh ya my HU is an Alpine CDA-9885 and I use my iPhone for my musics, full speed cable FTW
through an alpine PDX2.150 The best part is my sub, mmmm Fi Q powa! Fi Q 12" with BP in a 2.5cuft @ 32hz after displacement runnin off of a Clarion DPX 11551 @ 1600RMS @ 2ohms. **** ***** real hard, I need to fix my back window since it leaks from the pain this sub gives it. I was metered at 142dB im proud Back seat boxes suck, wish there was an easier way of getting a box set up without using 3/4 of my back seat. Ill post some pics and a video later today. Oh ya my HU is an Alpine CDA-9885 and I use my iPhone for my musics, full speed cable FTW
Champion
Joined: Jul 2008
Posts: 3,430
Likes: 2
From: NW Arkansas
yeah, itd be nice to do the dynamat, but not right now........i got a chance to mess around some today.....got my drivers speaker mounted and wires ran and got that side tweeter mounted.......i did go and get some 18 gage wire ......the speaks came with some but it was about the size of the stock......still have to take off the pass panel.........i sealed around my adapter with silicone and the hole where my wires are runnin thru to the crossover and tweeter......and you can see my awesome ducttape job....
Thread Starter
|
Professional
Joined: Apr 2008
Posts: 120
Likes: 0
From: Central MO
3 words...
TAX REBATE CHECKS
:-D
Btw...nice tweeter job
TAX REBATE CHECKS
:-D
Btw...nice tweeter job
Last edited by Gomer03; Feb 19, 2009 at 02:32 PM.
