DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Check valve assembly

Thread Tools
 
Search this Thread
 
  #1  
Old 03-25-2013, 08:33 PM
Tony5.9's Avatar
Tony5.9
Tony5.9 is offline
Registered User
Thread Starter
Join Date: Mar 2013
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default Check valve assembly
How do I take off the check valve assembly for the trani on a 96 ram 5.9 cause mine went bad n I need 2 replace the check valve
 
Reply Like
  #2  
Old 03-25-2013, 08:35 PM
redneck_ram's Avatar
redneck_ram
redneck_ram is offline
Champion
Join Date: Nov 2009
Location: Rochester, NH
Posts: 4,081
Likes: 0
Received 1 Like on 1 Post
Default
try here....
 
Reply Like
  #3  
Old 03-25-2013, 08:37 PM
stewie01's Avatar
stewie01
stewie01 is offline
Legend
Join Date: Mar 2011
Location: Fredericksburg, Virginia
Posts: 8,914
Likes: 0
Received 2 Likes on 2 Posts
Default
https://dodgeforum.com/forum/2nd-gen...46rh-46re.html
 
Reply Like
  #4  
Old 03-26-2013, 09:48 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,768
Likes: 0
Received 3,178 Likes on 2,931 Posts
Default
Don't replace it, drill it out, and leave it gone.
 
Reply Like
  #5  
Old 03-26-2013, 02:00 PM
zman17's Avatar
zman17
zman17 is offline
Retired Moderator - RIP
Join Date: May 2008
Location: NH
Posts: 18,729
Likes: 0
Received 16 Likes on 15 Posts
Default
Originally Posted by Tony5.9
How do I take off the check valve assembly for the trani on a 96 ram 5.9 cause mine went bad n I need 2 replace the check valve
Yes , drill it out as stated. But you need to remove that line(which I believe is your question to begin with). You need a special tool to disconnect that line from the radiator, cheap plastic round thing that comes in an assortment of sizes available at any auto parts store. And do yourself a favor , and get a Haynes manual while you are there.
 
Reply Like
  #6  
Old 03-26-2013, 08:27 PM
dhvaughan's Avatar
dhvaughan
dhvaughan is offline
Hall Of Fame
Join Date: Jul 2006
Location: Gainesville, Ga.
Posts: 12,204
Likes: 0
Received 8 Likes on 8 Posts
Default
^ 3/8 inch fuel line disconnect. the cheap $5 on is good enough.
 
Reply Like
  #7  
Old 03-26-2013, 10:02 PM
Tony5.9's Avatar
Tony5.9
Tony5.9 is offline
Registered User
Thread Starter
Join Date: Mar 2013
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by HeyYou
Don't replace it, drill it out, and leave it gone.
If I drill it out wont the torque converter drain over night of sitting
 
Reply Like

Trending Topics

  #8  
Old 03-26-2013, 10:05 PM
dodge dude94's Avatar
dodge dude94
dodge dude94 is offline
Banned Goober Smoocher
Join Date: Jun 2010
Posts: 8,916
Likes: 0
Received 1 Like on 1 Post
Default
Originally Posted by Tony5.9
If I drill it out wont the torque converter drain over night of sitting
Yep.


But if you install the Sonnax Sure Cure transmission shift kit, it will allow the fluid pump to pump in park.
 
Reply Like
  #9  
Old 03-26-2013, 10:13 PM
stewie01's Avatar
stewie01
stewie01 is offline
Legend
Join Date: Mar 2011
Location: Fredericksburg, Virginia
Posts: 8,914
Likes: 0
Received 2 Likes on 2 Posts
Default
Or you could wait a minute or two after you start her up to shove it in drive...
 
Reply Like
  #10  
Old 03-26-2013, 10:50 PM
dhvaughan's Avatar
dhvaughan
dhvaughan is offline
Hall Of Fame
Join Date: Jul 2006
Location: Gainesville, Ga.
Posts: 12,204
Likes: 0
Received 8 Likes on 8 Posts
Default
Originally Posted by Tony5.9
If I drill it out wont the torque converter drain over night of sitting
no. .
 
Reply Like



Advanced Search
Quick Reply: Check valve assembly


Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 07:45 AM.