The time has come for GEARS.
#1
The time has come for GEARS.
Tax season has been good to me this year, and I'm going to gear the truck finally! (LONG overdue) Lets hope my trans doesn't **** the bed after only 10k with 3.55s and 38's. I've decided that I will go with 4.56's and what I want to know is what brands to buy from, and where can I get the install kits for my 1500, being the D44 up front and Chrysler 9 and a quarter out back.
tl,dr: What quality (brand) gears / install kits to buy for 4.56's on my 1500?
tl,dr: What quality (brand) gears / install kits to buy for 4.56's on my 1500?
#3
#6
Moe's Performance is mostly for 3rd gens, and they don't carry the Yukons units, but they do have a very nicely priced Master Install kit for the rear end. I got my Master Install Kit for the front from Randy's Ring and Pinion (Yukon kit).
Moe's Rear End Master Kit, $99:
http://moesperformance.com/index.php...oducts_id=1456
Yukon's Front End Master Kit, $199:
http://www.ringpinion.com/ProductDet..._Gear_and_Axle
I also nabbed an Auburn LSD for the rear, but I am not going to get as serious as you are with the tires and off-road. A rear locker may not be a bad choice.
Moe's Rear End Master Kit, $99:
http://moesperformance.com/index.php...oducts_id=1456
Yukon's Front End Master Kit, $199:
http://www.ringpinion.com/ProductDet..._Gear_and_Axle
I also nabbed an Auburn LSD for the rear, but I am not going to get as serious as you are with the tires and off-road. A rear locker may not be a bad choice.
#7
Join Date: Jul 2007
Location: South Georgia/East Florida
Posts: 24,686
Likes: 0
Received 20 Likes
on
19 Posts
Honestly, WHO does the install is a LOT more important than what brand of gears you buy. Yukons are very good, but I've never really seen any of them be bad that I couldn't trace back to a bad install. There was one brand that gave installers fits, I wanna say they are US Gear, but don't hold me to it.
I bought Genuine G2s, basically because of the lifetime warranty and they have never made a hint of a whine, despite some really bad press you read about them. Other reason is that gears are heavy and costly to ship and the G2s I could pick up at my local 4 Wheel Parts and not have to pay shipping.
As far as the install kit, the Yukon is good, uses Timken bearings. Pretty much any kit with Timkens would be a good kit.
This is ALL about the install. Find you a reputable shop with a very experienced installer and pay their price. This is NOT the kinda thing you want to skimp and try to save $50 on the install.
Just break 'em in properly and you'll love the 4.56s. Your tranny will also thank you for it...
I bought Genuine G2s, basically because of the lifetime warranty and they have never made a hint of a whine, despite some really bad press you read about them. Other reason is that gears are heavy and costly to ship and the G2s I could pick up at my local 4 Wheel Parts and not have to pay shipping.
As far as the install kit, the Yukon is good, uses Timken bearings. Pretty much any kit with Timkens would be a good kit.
This is ALL about the install. Find you a reputable shop with a very experienced installer and pay their price. This is NOT the kinda thing you want to skimp and try to save $50 on the install.
Just break 'em in properly and you'll love the 4.56s. Your tranny will also thank you for it...
Trending Topics
#8
As far as 4.88's go, I was considering it, but I do too much highway driving to justify purchasing. Got a locker wait'n for me . I got a really good guy who builds drag racing vehicles, and he's done his share of rear ends. Thanks for the warning about US Gears, I was actually looking at a set of them. Thanks for the support guys!
#9
Very true statement,
I like the Yukon and Yukon’s Master kits but each to their own. Most shops don't even like to install gearing because it's a big pain in the ***, not to mention most of them couldn't do it correctly anyway, but that's a different story!
Anyway, I would look around your local shops that have a good name and try to find a mechanic that has a niche for Mopar and likes to work on the Ram's. Most of those guys will have it down to a science and can work on them in any light, not to mention their really fast and do it right the first time. But if you know someone then great.
That's what I did and I had a great install job! I rolled out of there with about $1,550 short in my wallet, but that was both front and rear with a Dana 70 rear and a Dana 60 front and 2 odd small jobs while he was in there.
I like the Yukon and Yukon’s Master kits but each to their own. Most shops don't even like to install gearing because it's a big pain in the ***, not to mention most of them couldn't do it correctly anyway, but that's a different story!
Anyway, I would look around your local shops that have a good name and try to find a mechanic that has a niche for Mopar and likes to work on the Ram's. Most of those guys will have it down to a science and can work on them in any light, not to mention their really fast and do it right the first time. But if you know someone then great.
That's what I did and I had a great install job! I rolled out of there with about $1,550 short in my wallet, but that was both front and rear with a Dana 70 rear and a Dana 60 front and 2 odd small jobs while he was in there.
#10
As far as 4.88's go, I was considering it, but I do too much highway driving to justify purchasing. Got a locker wait'n for me . I got a really good guy who builds drag racing vehicles, and he's done his share of rear ends. Thanks for the warning about US Gears, I was actually looking at a set of them. Thanks for the support guys!
4.88s really are the better choice.