Throttle body mod
#21
so the bore of a stock tb about 48mm and at the throttle plate its opens up tp 50mm or so because stock throttle plates are 50mm
so cut off air horns and then bore out the tb above the plates,,, you wanting to bore out and open up the 48mm part to 50+,,, just dont go below the plates
so cut off air horns and then bore out the tb above the plates,,, you wanting to bore out and open up the 48mm part to 50+,,, just dont go below the plates
#22
#23
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
so the bore of a stock tb about 48mm and at the throttle plate its opens up tp 50mm or so because stock throttle plates are 50mm
so cut off air horns and then bore out the tb above the plates,,, you wanting to bore out and open up the 48mm part to 50+,,, just dont go below the plates
so cut off air horns and then bore out the tb above the plates,,, you wanting to bore out and open up the 48mm part to 50+,,, just dont go below the plates
#24
#25
#26