ABS not working?
#21
#22
There should be index marks, with numbers, on the body of the sensor housing. Need to know what the tooth count on the driven gear (the one in the sensor) is, and then look for the index mark with that number next to it, and that's the one you use.
There are some good pics, and a better explanation in the 96 service manual you can download from here.
There are some good pics, and a better explanation in the 96 service manual you can download from here.
#23
#24
Shouldn't matter which t-case he has, they all used the same sensor, and the alignment procedure in the the manual doesn't differentiate between any of the versions.
#28
The first pic is the part that get's indexed as HeyYou said So he's obviously right about that. The other part just goes on one way.
Also it's pretty obvious that the patc website is wrong in stating that the one in the second pic is for a 241 tc.
Also it's pretty obvious that the patc website is wrong in stating that the one in the second pic is for a 241 tc.
Last edited by zman17; 08-10-2011 at 01:24 PM.