When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have a 99 ram 4x4 wit auto tranny and thiis morning going to work started hearing a grinding noise and when I get to work try to back up and I get nothing, try to put in drive get nothing. Guess my tranny is f**kd. Anyone have similiar experience.
I went out and tried it and still won't go forward or back and it was hard shifting from reverse to forwards and than back to park. What you guys think?
Just a couple of Q's, have you done a visual inspection under the truck, tranny, t case, shift linkage, look for cracks, big holes, leaking fluid. Does the t case shifter still move? if so have you tried moving the truck in 4 hi or 4 low?
Everythin is hookd up no leaks. I jus tried again and put it in 4 low and it wouldn't go so I gassed on it a bit and it poppd and truck jumped and now it moves, put back in 2wd and will go forward and back. I'm so confused.