Throttle Body Mod
#21
09-24-2012, 08:24 PM
Join Date: Jul 2012
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
This is the one I will be going with soon, very nice piece but pricey.
http://www.compperformancegroupstore...egory_Code=Gas
And if you are not into welding a 02 bung into the pipe go with one of these, I used one until I redid my exhaust about a week ago.
http://www.aemelectronics.com/no-wel...nt-3-inch-1175
http://www.compperformancegroupstore...egory_Code=Gas
And if you are not into welding a 02 bung into the pipe go with one of these, I used one until I redid my exhaust about a week ago.
http://www.aemelectronics.com/no-wel...nt-3-inch-1175
That's very pricey. I see a lot of guys using Innovative Motorsports wideband O² sensors with much success. I know my dataloging software on my laptop says it will work with Innovative's so that's why I chose that brand. I like the second link you posted, that would work until I welded it in. Great find!
#22
09-24-2012, 09:03 PM
Captain
This is the one I will be going with soon, very nice piece but pricey.
http://www.compperformancegroupstore...egory_Code=Gas
And if you are not into welding a 02 bung into the pipe go with one of these, I used one until I redid my exhaust about a week ago.
http://www.aemelectronics.com/no-wel...nt-3-inch-1175
http://www.compperformancegroupstore...egory_Code=Gas
And if you are not into welding a 02 bung into the pipe go with one of these, I used one until I redid my exhaust about a week ago.
http://www.aemelectronics.com/no-wel...nt-3-inch-1175
#23
10-13-2012, 02:30 PM
Join Date: Jul 2012
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
The AEM weldless bung worked great! I too redid my exhaust with the Jegs off road Y pipe kit. I also did a Flowmaster Delta dumped under the cab. I got lucky and haven't thrown a CEL due to me not having a cat. It sounds great though!
This is the kit I got:
http://www.jegs.com/i/JEGS+Performan...31020/10002/-1
This is the kit I got:
http://www.jegs.com/i/JEGS+Performan...31020/10002/-1