2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

96 1500 with5.9 with possible timing out 180 issues

Thread Tools
 
Search this Thread
 
  #31  
Old 01-04-2013, 11:59 AM
aim4squirrels's Avatar
aim4squirrels
aim4squirrels is offline
Legend
Join Date: Jul 2007
Location: DFW, Texas
Posts: 7,843
Likes: 0
Received 12 Likes on 12 Posts
Default

Go ahead and post up what I PMed you here. Be 100% sure you know what you're doing when pulling the distributor and be 100% sure you're at #1 TDC. There's about 6° of dwell at the top of the piston.

Good luck. Sorry you inherited a problem.
 
  #32  
Old 01-06-2013, 04:07 PM
torch9169's Avatar
torch9169
torch9169 is offline
Amateur
Thread Starter
Join Date: Dec 2012
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

Why would i not be getting power to the engine fuse in fuse box
 
  #33  
Old 01-06-2013, 06:17 PM
HeyYou's Avatar
HeyYou
HeyYou is online now
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,879
Likes: 0
Received 3,197 Likes on 2,949 Posts
Default

Key off? ASD relay not engaged? (engine not running...) Does it show power for a few seconds when you first turn the key on?
 
  #34  
Old 01-06-2013, 11:00 PM
torch9169's Avatar
torch9169
torch9169 is offline
Amateur
Thread Starter
Join Date: Dec 2012
Posts: 28
Likes: 0
Received 0 Likes on 0 Posts
Default

I will check tmmrw to see if it does.i dnt understand what it is and as far as the asd,i am getting fire from my coil and to my plugs and im getting fuel.with my key on i wasnt getting power to the #9engine fuse which is marked "engine"but i didnt check to see if i got power for a minute when i first turn key.will check in the morning
 
  #35  
Old 01-07-2013, 03:07 AM
JoshSlash87's Avatar
JoshSlash87
JoshSlash87 is offline
Captain
Join Date: Jul 2012
Posts: 561
Received 3 Likes on 3 Posts
Default

Put your finger in the #1 hole and have a buddy turn it over till you feel your finger pop out P*ssy!. Seriously finding #1 cylinder is easy.
 

Last edited by JoshSlash87; 01-07-2013 at 03:12 AM.



Quick Reply: 96 1500 with5.9 with possible timing out 180 issues



All times are GMT -4. The time now is 01:27 PM.