When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
hey guys. im looking at this leveling kit on ebay
http://www.ebay.com/itm/321465218013?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AITmy question is would i be able to install this without having to change any other components? pitman arm, shocks front or real, lower or upper traction bars. anyone with knowledge on this is appreciated. thanks ahead of time.
so the front is 3 inches so thats within the as you say "up to 3 inches" so id be good there. now the back is a 4 inch block. so then id have to get new shocks in the rear?
I am not a fan of blocks for the rear. Especially on our trucks, that ALREADY HAVE a block back there..... stacking blocks has always been considered a major no-no since way back when. Why pretty much all the lift manufacturers are now doing it, is a mystery to me.
im just gonna do it the right way. im saving up a couple hundred more bucks and gonna get a 5 inch tuff country kit. this one p/n-35912KN
i already asked this in another thread but is there anything else ill need thats not included in the kit?