When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
So stock was 3.54. But, by the numbers on the gears, looks like 4.11's......
If you have the driveshaft off, (four bolts... really easy) mark the ring gear, note it's position, then see how many times the pinion gear goes around for one revolution of the ring gear.
So stock was 3.54. But, by the numbers on the gears, looks like 4.11's......
If you have the driveshaft off, (four bolts... really easy) mark the ring gear, note it's position, then see how many times the pinion gear goes around for one revolution of the ring gear.
HeyYou haha was wondering if you were going to be the one to help me solve another problem, the trucks been great since we solved the misfire issue but getting it into 4 wheel drive isn't so great. When I lock it in and try and drive it feels like the front is working against the rear, which is why I pulled the cover and don't trust the tag, there's been a few weird things with this truck that the previous owner never told me about so trying to figure it out
If you have different ratios front and rear, yeah, it just ain't gonna work well. It'll break things if ran that way. Verify ratios on both ends, see what ya got.
If you have different ratios front and rear, yeah, it just ain't gonna work well. It'll break things if ran that way. Verify ratios on both ends, see what ya got.
I know rear is 3.55 cause I just put it in like 6 months ago, going to confirm front today