2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2000 ram 2500

Thread Tools
 
Search this Thread
 
Old May 30, 2017 | 06:57 AM
  #1  
Laminitis's Avatar
Laminitis
Thread Starter
|
Rookie
Joined: May 2017
Posts: 66
Likes: 0
Default 2000 ram 2500

I have a 2000 ram 2500 4x4 5.9V8,it's backfiring and losing power up hills and stutters when speeding up.i have new plugs,alt., and fuel pump what could b the next thing to.
 
Reply
Old May 30, 2017 | 07:43 AM
  #2  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,197
Likes: 363
From: Winston Salem, NC
Default

Read this.

https://dodgeforum.com/forum/2nd-gen...um-thread.html
 
Reply
Old May 30, 2017 | 01:50 PM
  #3  
Laminitis's Avatar
Laminitis
Thread Starter
|
Rookie
Joined: May 2017
Posts: 66
Likes: 0
Default distributer

What do i have to do to get to the spark plug wires and distributer.it looks like a pain.
 
Reply
Old May 30, 2017 | 02:35 PM
  #4  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,197
Likes: 363
From: Winston Salem, NC
Default

Climb up on the engine.
 
Reply
Old May 30, 2017 | 02:37 PM
  #5  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,394
Likes: 4,213
From: Clayton MI
Default

Break out your arm with three elbows.

Yeah, it's a pain. What I do, is pull the air filter box off the top of the throttle body, and lay a piece of plywood across the radiator support, and throttle body, and lay on that to play with the stuff on the distributor. It isn't real comfortable, but, you can actually do what you need to do, and almost see what you are doing. Almost......
 
Reply
Old May 30, 2017 | 03:06 PM
  #6  
Laminitis's Avatar
Laminitis
Thread Starter
|
Rookie
Joined: May 2017
Posts: 66
Likes: 0
Default

Originally Posted by HeyYou
Break out your arm with three elbows.

Yeah, it's a pain. What I do, is pull the air filter box off the top of the throttle body, and lay a piece of plywood across the radiator support, and throttle body, and lay on that to play with the stuff on the distributor. It isn't real comfortable, but, you can actually do what you need to do, and almost see what you are doing. Almost......
Ok.great i'll do that
 
Reply
Old May 30, 2017 | 06:00 PM
  #7  
Laminitis's Avatar
Laminitis
Thread Starter
|
Rookie
Joined: May 2017
Posts: 66
Likes: 0
Default distributer

Alright,i put a new dist.cap and wires on,but how in the heck do u get the rotater off of the center post.
 
Reply
Old May 30, 2017 | 06:37 PM
  #8  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,394
Likes: 4,213
From: Clayton MI
Default

It just pulls off. If it has been there a while, it can be reluctant to come off.
 
Reply
Old May 30, 2017 | 07:23 PM
  #9  
Laminitis's Avatar
Laminitis
Thread Starter
|
Rookie
Joined: May 2017
Posts: 66
Likes: 0
Default

Originally Posted by HeyYou
It just pulls off. If it has been there a while, it can be reluctant to come off.
Yeah it was a pain so i just left it on.is there a way to pry it up
 
Reply
Old May 30, 2017 | 07:25 PM
  #10  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,394
Likes: 4,213
From: Clayton MI
Default

Long bar, and brace it against something you cant break.
 
Reply



All times are GMT -4. The time now is 06:13 PM.