Ball joints installed wrong ???????
#1
Ball joints installed wrong ???????
Hey ram fam so I just bought a 95-96 dodge Dana 60 axle and when looking at other axles of different years it appears that my ball joints are not pressed into the c-knuckle on the axle tube but on the caster arm I think that's what you call it am I just over reacting or are the ball joints actually put in wrong never dealt with this before.
Last edited by Packer2997; 04-10-2018 at 12:51 PM.
#2
#4
#6
#7
Trending Topics
#9
That's the way my '96 front Dana 60 ball joints are oriented. To grease them, I installed the grease fittings, greased the joints, then removed the grease fittings and installed threaded plugs, as the grease fittings protruded just enough to interfere with the u-joint/stub axle assembly.
It also has a weird setup where the front rotor and hub on each side are held together with knurled lug studs
It also has a weird setup where the front rotor and hub on each side are held together with knurled lug studs
Last edited by AtomicDog; 04-10-2018 at 10:15 PM.