1996 ram 1500 5.2l 4x4 won't run
#1
1996 ram 1500 5.2l 4x4 won't run
1996 ram 1500 5.2l 4x4
So my truck doesn't get driven much. And now I'm having some running issues. It has spark at the coil, spark at the plugs, the dizzy cap didn't look good when pulled (little corrosion on the inside) replaced with new one I had. No change. Checked all fuses and they are good. Cam sensor tested good. Put in a spare IAC as well with no change. Not sure where to go from here. Going to pull the plugs next and take a look. Maybe crank sensor ?
can get the truck running with throttle but won't idle well and starts hard
So my truck doesn't get driven much. And now I'm having some running issues. It has spark at the coil, spark at the plugs, the dizzy cap didn't look good when pulled (little corrosion on the inside) replaced with new one I had. No change. Checked all fuses and they are good. Cam sensor tested good. Put in a spare IAC as well with no change. Not sure where to go from here. Going to pull the plugs next and take a look. Maybe crank sensor ?
can get the truck running with throttle but won't idle well and starts hard
#2
#4
#5
#6
#7
Trending Topics
#8
#10
The 0320 refers to 'engine speed sensor/distributor'...... I suppose, for the longest time, what would be considered the 'tach' signal came from the distributor. And he is apparently getting spark, and has good fuel pressure......